315205
16
Zoom out
Zoom in
Previous page
1/18
Next page
34
Worktop for built-under models
The appliance must
only be installed beneath a continuous fitted kitchen worktop.
If the appliance will be built under it is mandatory
to use the cover panel UBS. This can be obtained
from specialist shops or from After-Sales Service.
1.Unplug the appliance.
2.Unscrew the worktop fixing screws from the rear of the appliance.
3.Slide the worktop fully backward and lift it upwards to remove. Install the cover panel following the
relative instructions.
4.Refit the fixing screws and tighten them.
5.Plug the appliance only into the mains power socket.
Connect the water inlet hose
For models with straight hose A
1.Insert the dirt strainer (already premounted on the hose end or
included in the accessories) into the threaded tap coupling.
2.Carefully screw the hose connection onto the tap preferably by hand.
3.Make sure there are no kinks in the hose.
4.Check water-tightness of tap and appliance connections by turning the
tap completely on.
If the hose is too short, replace it with a suitable length of pressure
resistant hose (1000 kPa min, EN 50084 approved type).
Periodically check the hose for brittleness and cracks and replace if
necessary.
The appliance can be connected without an anti-backpressure valve.
For models with Water Stop hose B
If the flexible hose is damaged, unplug the appliance from the mains
immediately.
1.Screw the threaded connector with the filter inserted onto the tap.
2.Check water-tightness of tap and appliance connections by turning
the tap completely on.
If the hose is too short, replace it with a 3 m Water Stop hose (available
from After-Sales Service or from your dealer). This operation must be
carried out exclusively by a licensed electrician.
The appliance must not
be connected to the mixing tap of a non-
pressurized water heater.
The inlet hose and the plastic enclosure at the tap connection contain
electrical components. Do not cut the hose and do not immerse the
plastic enclosure in water.
B
A
3gb05005.fm5 Page 34 Thursday, March 1, 2001 10:44 AM
Black Process Plate
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool awm 6104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool awm 6104 in the language / languages: Dutch as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info