366791
9
Zoom out
Zoom in
Previous page
1/19
Next page
9
WASHING PROGRAMME
Selecting the programme:
1.
Plug in the appliance.
2.
Turn on the water supply tap.
3.
Set the
Programme Selector
knob to the desired programme.
4.
Depending on model, set the
Temperature Selector
knob to the desired temperature.
5.
Depending on model, set the
Spin Speed Selector
knob to the desired spin speed.
6.
Select additional
options
, if desired, pressing the corresponding button.
By a
further pressing
of the button this option can be turned off again.
7.
Check that the door is well closed. Press the
“On/Off”
button.
The indicator light will come on.
During the selected washing programme the programme selector knob moves by steps clockwise
through the phases
prewash
,
main wash
,
rinse
and
spin
. Each step takes from some seconds to
several minutes.
Options
(depending on model)
Easy Ironing
Can be used together with Cotton and Synthetics programmes to make ironing easier.
Increases the water quantity and the clothes are spun very gently.
Energy save /
Eco
The duration of the wash is extended and the temperature reduced to save energy
maintaining good washing results.
Quick wash /
Rapid
Select for quick, economical washes.
Especially suitable for small, lightly soiled loads.
Intensive
rinse
More water and a longer time in rinse cycle is added.
The intensive rinse function is especially suitable for areas with particularly soft
water, for baby clothes and to help people with allergies.
Rinse hold /
Spin delay
The laundry remains in the last rinse water without being spun, to avoid heavy
creasing and to prevent colours from changing.
Especially suitable for the “Synthetics” or “Delicates” programmes, if the laundry
is not to be unloaded immediately after the end of the programme.
This function is particularly useful if you want to postpone spinning to a later time
or when you do not wish to spin the clothes.
Continuing wash cycle after rinse hold:
Press the Rinse hold button again; the load will be spun according to the selected
programme.
If you do not wish to spin the clothes, turn the programme selector knob to the drain.
Spin speed
reduction
Press this button to reduce the predetermined automatic maximum spin speed. In
some programmes the maximum final spin speed is limited to go easy on your
laundry items. Selection of a higher spin speed is not possible.
No spin
Press this button to exclude the spin function from the programme.
Note:
If “No spin” is selected:
the “Wool” and “Delicates” programme do not run a spin cycle.
the “Cotton” and “Synthetics” programmes run a reduced spin speed cycle between
rinses to ensure effective rinsing.
If the spin speed “0” is selected, the final spinning is cancelled. The water is
drained out only.
Half Load
Reduces water consumption, above all during rinsing.
Suitable for lightly-soiled laundry and small loads (max 3 kg).
Note:
Reduce the detergent quantity.
Cold Wash
With this option water is heated only up to 20°C.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool awm 510 ix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool awm 510 ix in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info