307420
8
Zoom out
Zoom in
Previous page
1/18
Next page
26
Start delay
(depending on model)
1. Select the programme and temperature, any additional options and the spin speed.
2.
Press the On/Off button. The indication light flashes.
3.
Press for 6 seconds the Start delay button and select the time: 2,4,6 or 8 hours.
4.
The programme will start at the desidered time.
The start delay can be corrected: switch off the machine, then switch it on and press again Start
delay: for 6 seconds you can choose a new delay time.
Cancelling the start delay: if, in fact, no start delay was actually desired, switch off the machine
and then switch it on again. The selected programme starts immediately.
If the programme or options are changed after selecting the Start delay the programme starts if the
desired time is reached.
N.B.
With liquid detergent, a dosing aid placed directly in the drum should be used if a start delay has
been selected.
Door lock
The door locks automatically after the programme start until the end of the programme.
If the programme selector is moved to the Stop position or if the electricity supply is interrupted,
then after approximately one minute the door is released.
In this case do not open the door, because hot water could come out of the door.
Programme end
The programme selector knob is at the stop position.
1.
Press the
On/Off
button. The indicator light turns off.
2.
Cancel the special options by pressing the appropriate buttons.
3.
Turn the water supply tap off.
4.
Wait for the door to unlock (about one minute).
5.
Open the door and unload the machine.
N.B.
Do not fully close the door but leave it ajar to allow the drum to dry out.
Changing programme
1.
Press the
On/Off
button. The indicator lights turns off.
2.
Select the new programme.
3.
Press the
On/Off
button. The new program will re-start.
For this programme do not add any further detergent.
Changing options
The options can be selected or deselected without switching off the appliance.
Programme interruption or pause
To interrupt the running programme for a certain period and continue it at a later time:
1.
Press the
On/Off
button.
2.
Following the desired pause press the
On/Off
button once again.
Cancelling the programme
If the current programme is to be terminated prematurely and cancelled, the water must be pumped out
first before the door can be opened:
1.
Press the
On/Off
button to switch off the appliance.
2.
Set the programme selector to programme setting
Drain
.
3.
Press the
On/Off
button in order to start the
Drain
programme.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool awm 5090 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool awm 5090 in the language / languages: Dutch as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool awm 5090

Whirlpool awm 5090 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info