470485
14
Zoom out
Zoom in
Previous page
1/15
Next page
Connect the water supply hose(s) (A or B, depending
on the model)
If your washing machine has one inlet hose and one inlet
valve on the back: connect to cold water supply only.
If your washing machine has two inlet hoses and two
inlet valves on the back: connect to cold and hot water
supply, or to cold water supply only by using the Y-piece
connector. Both inlet valves must be connected to the
water supply. Observe the detailed instructions in your
programme chart.
1.
Carefully screw the hose connection onto the tap,
preferably by hand.
2.
Make sure there are no kinks in the hose.
3.
Check water-tightness of tap and appliance connections by
turning the tap completely on.
The appliance
must not be
connected to the mixing tap of a
non-pressurized water heater.
The appliance can be connected without a non-return valve.
If the flexible hose is damaged, unplug the appliance from
the mains immediately.
If the hose is too short, replace it with a longer length of
“Water Stop” hose (available from After-Sales Service or
specialist dealer).
Mount the new hose professionally on the washing machine
and the tap.
Note that the Aquastop/Water Stop safety function is no
longer guaranteed once the hose coating is damaged.
Connect the water drain hose
1.
Connect the drain hose to the ventilated siphon or hook it
over the edge of a sink with the “U” bend.
2.
Make sure there are no kinks in the hose.
3.
Secure the hose so that it cannot fall down while the
appliance is running.
Small wash-hand basins are unsuitable.
If you need to add an extension, use a hose of the same type.
Secure the connections with clips.
Max. drain hose length: 2.50 m
Max. drain height: 1.25 m
Min. drain height: 0.70 m
Safety valve
inspection
window
A
B
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AWM 1113 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AWM 1113 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AWM 1113

Whirlpool AWM 1113 User Manual - German - 16 pages

Whirlpool AWM 1113 User Manual - Dutch - 16 pages

Whirlpool AWM 1113 Quick start guide - Dutch - 2 pages

Whirlpool AWM 1113 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info