314433
14
Zoom out
Zoom in
Previous page
1/14
Next page
GB 14
FITTING A DÉCOR DOOR TO THE APPLIANCE
The appliance front part has been fitted to accommodate the hinges so that the door can be opened either
from the left or from the right hand side.
Proceed as follows:
1.
Screw the hinges onto the décor door, if a dummy drawer front is also being used ensure it to be fastened
to the top edge of the door. Ensure the gap between door and drawer matches the units either side.
2.
Fix the two hinge plates to the front of the washer dryer using the two plastic backing pieces.
Note:
an 8mm box spanner can be used to screw the thread cutting screws into position.
3.
Fasten the two magnetic catches to the opposite side to the hinges and ensure the metal straps are
fastened to the back of the door.
4.
Locate the hinges on the door into the two hinge plates on the appliance.
5.
If adjustment is necessary this can be achieved by either the hinge plates (vertical) or by the hinge fixing
screws (horizontal).
FITTING A FULL HEIGHT DOOR
If a full height door is to be fitted (no dummy drawer front is being used) a top hinge hole has to be drilled
in the door.
The distance between the two hinge hole centres is 360 - 384mm and the distance from the edge of the
door is 21.5mm.
The hinge hole should be max 12mm deep and its diameter 35mm: make sure you do not drill through the
door.
The two fixing holes for the hinge screws are 2mm.
DÉCOR STRIP
A décor strip can be screwed into position on the edge of the washer dryer. If needed, the strip can be cut
to be adjusted to your furniture but normally this will not be necessary.
TO LINE UP
TO DRILL
30120030GB.fm Page 14 Thursday, April 30, 2009 12:17 PM
Black process 45.0° 150.0 LPI
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool awg 912 d at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool awg 912 d in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool awg 912 d

Whirlpool awg 912 d Quick start guide - English - 2 pages

Whirlpool awg 912 d Quick start guide - French - 2 pages

Whirlpool awg 912 d User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info