709210
3
Zoom out
Zoom in
Previous page
1/8
Next page
3
EN
4. SWITCH ON THE WASHING MACHINE
Press the “On/O button until the programme button
lights up. An animation appears on the control panel and
the appliance plays a sound. The washing machine is then
ready for operation.
5. SET THE DESIRED PROGRAMME
GUIDED MODEthe button light will guide you through setting
your programme in the following order: Selection of programme/
temperature/spin speed/options. As soon as you conrm a selection
by pressing the knob, the button light jumps to the next step.
Select programme:
Make sure that the programme button lights up.
Turn the knob to select the desired programme.
The indicator next to the selected programme lights up.
Conrm the desired programme by pressing the knob.
Change temperature, if required
If you want to change the temperature indicated on the
display, make sure that the Temperature button lights up.
Turn the knob to select the desired temperature, then press
the knob to conrm.
Change spin speed, if required
If you want to change the spin speed indicated on the
display, make sure that the Spin button lights up.
Turn the knob to select the desired spin speed, or Rinse
hold, then press the knob to conrm.
Refer to OPTIONS, FUNCTIONS AND INDICATORS for more
information.
Select options, if required
If you want to select additional options, make sure that the
Options button lights up. The options which are selectable
for your programme are indicated by the arrows which are lit
up
.
Turn the knob to select the desired options. The symbol for the
selected option will ash. Press the knob to conrm.
Some options/functions can be selected by pressing the button
directly:
Refer to the OPTIONS, FUNCTIONS AND INDICATORS section for
more information.
INDIVIDUAL MODE
After you have switched on the washing machine, you are not
forced to follow the GUIDED MODE.
The order in which you choose to set your programme is up to you.
To make a setting, rst press the relevant button, then turn the knob
to select, and nally press the knob to conrm.
The range of temperatures, spin speeds and options depend on the
programme selected. It is therefore recommended that you start by
selecting the programme.
6. ADD DETERGENT
If you are not using the Dosing Aid function, pull out the
detergent dispenser and add detergent (and additives/
softener) now; observe the dosing recommendations on
the detergent pack.
If you have selected PREWASH or START DELAY, observe the
recommendations in the OPTIONS, FUNCTIONS AND INDICATORS
section. Then carefully close the detergent dispenser.
If you are using the “Dosing Aid” function, add detergent later,
after you have started the programme. Refer to the OPTIONS,
FUNCTIONS AND INDICATORS section for more information.
After having added detergent/additives, do not open the
detergent dispenser to avoid any overow.
7. START PROGRAMME
Press and hold Start/Pause until the button lights up and
stays on; the programme will start.
If you have selected Dosing Aid, the washing machine
indicates the recommended detergent amount for your laundry
load after the programme starts.
Follow the instructions as indicated in the OPTIONS, FUNCTIONS
AND INDICATORS/Dosing Aid section.
8. CHANGE THE SETTINGS OF A PROGRAMME WHICH IS
RUNNING, IF REQUIRED
You can still change the settings while a programme is running.
The changes will be applied, provided the respective programme
phase has not yet nished.
Press the relevant button (for example the Spin speed button to
change the spin speed). The selected value will ash for a few
seconds.
While it is ashing, you can adjust the setting by turning the knob.
If the value stops ashing before you have adjusted it, press the
button again.
Press the knob to conrm the new setting. If you do not conrm it,
the new setting will be conrmed automatically: It will stop
ashing.
The programme will continue automatically.
To change the settings of a programme which is running, you can
also:
Press “Start/Pause to pause the programme which is running.
Change the settings as desired.
Press “Start/Pause again to continue the programme.
9. PAUSE A PROGRAMME WHICH IS RUNNING AND OPEN
THE DOOR, IF REQUIRED
Press and hold Start/Pause to pause a programme which
is running.
Provided the water level and/or temperature is/are not
too high, the door open indicator lights up. You can
open the door, for example to add/remove laundry.
Press “Start/Pause to continue the programme.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AWG 812 S-PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AWG 812 S-PRO in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AWG 812 S-PRO

Whirlpool AWG 812 S-PRO User Manual - German - 8 pages

Whirlpool AWG 812 S-PRO User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info