Unpack the Air Conditioner
Remove packaging materials
• Remove and dispose of/recycle packaging
materials. Remove tape and glue residue from
surfaces before turning on the air conditioner.
Rub a small amount of liquid dish soap over the
adhesive with your fingers. Wipe with warm
water and dry.
• Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the
surface of your air conditioner.
Install Portable Air Conditioner
Install Exhaust Hose and Adapter
1. Roll air conditioner to selected location. See
"Location Requirements."
2. Insert hose adapter into slot on the back of air
conditioner.
3. Slide down to lock hose into place.
Installation for open type window
1. Make sure that the window exhaust nozzle is
connected to the hose
2. Open the window, place the exhaust nozzle to
the window
3. Extend the Exhaust hose and close the window
as much as possible to trap the exhaust nozzle
Attention: just recommend for cooling use
For heating mode we recommend fixed installation
of the portable either by using the sliding kit for
the window, or cutting a hole on the window and
fixing the hose securely, or using an existing
ventilation hole which exisst in your house.
INSTALLATION INSTRUCTIONS
A. Evaporator air intake
B. Hose adapter
C. Flexible exhaust hose
D. Window exhaust adapter
INDOOR
31
