515823
19
Zoom out
Zoom in
Previous page
1/26
Next page
122
ELECTRICAL SAFETY REQUIREMENTS
1.
The power supply must be of rated voltage with special
circuitry for air-conditioning. The diameter of the power
cord must comply with requirements.
2.
Applicable voltage range: the normal operating range of
voltage is 90%~110% of rated voltage.
3.
Never pull the power cord.
4.
Ensure safe grounding and a grounding wire connected with
the special grounding system of the building, installed by
professionals. The mains must be fitted with electrical
leakage protection switch and an air switch with sufficient
capacity (Refer to the following chart). The air switch must
also have a magnetic and a thermal tripping function to
ensure protection in case of short-circuit and overload.
5.
The minimum clearance between air conditioner and any
flammable surface is 1.5m.
Notes:
The live wire, neutral wire and grounding wire inside
the power socket must be connected. Connect these
wires correctly and reliably without short circuit.
Incorrect connection could cause fire.
AMC 993 will be connected only to a supply with the
relevant resistance no more than Zmax=0.234 ohm
and Zmax=0.051 ohm on the AMC 994.
AMC 992 will be connected only to a supply with the
relevant system impedance no more than
Zmax=0.301ohm
Grounding Requirement
1.
As the air-conditioning unit is a Class 1 electrical appliance,
reliable grounding measures must be taken.
2.
The yellow and green cable inside the air conditioner is for
grounding and must not be used for other purposes or cut.
Do not tighten with tapping screws; this could cause
electrocution.
3.
The earth resistance must comply with the requirements of
national standard GBI7790.
4.
The user power supply shall have a reliable grounding
terminal. It is prohibited to connect the grounding wire to
the following items: 1) Water Supply Pipe 2) Gas Pipe 3)
Sewage Pipe 4) Other positions that are considered unsafe
professionals.
Other:
1.
The connection between the air conditioner and power
cables and the connection between separate elements shall
be in accordance with the wiring diagram attached on the
machine.
2.
The model and rating of fuse shall be in accordance with the
stencil on the control or fuse tube.
3.
External static pressure of air conditioner at test position is
0Mpa.
Model Capacity of air
break switch
Min. section of
grounding cable
Min. section of
power cable
AMC 996 20A 1.0M2 1.5M2
AMC 998 20A 1.5M2 1.5M2
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AMC 998 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AMC 998 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AMC 998

Whirlpool AMC 998 User Manual - German - 25 pages

Whirlpool AMC 998 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info