GB7
1. Control panel.
2. Grease filters.
3. Halogen lamps.
4. Telescopic flue.
Control panel
1. Motor ON/OFF
2. Speed selection (increase/decrease)
Indicator lights:
a. running at minimum extraction speed
b. running at medium extraction speed
c. running at maximum extraction speed
d. running at intensive extraction speed
NB = the intensive extraction speed is timed for 5 minutes, after which the motor will revert to medium speed.
3. Light ON/OFF
NB = control backlighting brightness increases when the function is in use.
DESCRIPTION AND USE OF HOOD
24. Assemble the lower sections of the flue covering the truss.
25. Secure the two parts using the screws as shown.
26. Fit the flues in their seat over the hood and completely covering it.
27. Remove the grease filter/s.
28. Secure the lower sections of the flues from inside the hood, using the screws as shown.
29. For Filter Version only: Fit the carbon filter.
N.B.: (the carbon filter must be ordered separately for this model)
30. Fit the lower tabs (hook fitting).
31. Fit the upper tabs (press fitting).
N.B.: The upper tabs should be cut to size.
32. Install the filter(s) / fill grease.
Check for correct hood operation, referring to the section describing the hood and how to use it.
