702386
9
Zoom out
Zoom in
Previous page
1/20
Next page
EN9
INSTALLATION  ASSEMBLY INSTRUCTIONS
The instructions below, to be carried out in the order in which they are numbered, refer to the gures (with the same step
numbers) provided on the last few pages of this manual.
IMPORTANT: The ue kit must be purchased in order to use the hood in “Extractor Version”; it must be ordered
and tted before use.
1. Mark a vertical centre line on the wall.
2. Place the drilling diagram on the wall (xing it with adhesive tape): the vertical centre line printed on the drilling
diagram must be aligned with the centre line drawn on the wall, and the lower edge of the drilling diagram must be
aligned with the lower edge of the hood.
Drill the 3 holes as shown on the drawing.
IMPORTANT: The bottom edge of the drilling diagram must have a min. distance of 40 cm (for electric hobs) or
45cm (for gas hobs).
3. Remove the drilling template from the wall, x the support bracket to the wall with 2 plugs and 2 screws and insert
the third plug in the lowermost hole.
4. Extractor Version only - Place the ue support bracket on the wall. Drill and insert the wall plugs as shown. Fix the
bracket.
5. Open the perimeter hood panel.
6. Remove the grease lter.
7. Hook the hood onto the support bracket.
8. Tighten the two adjustment screws.
9. Adjust the hood horizontally, using a level and operating on the two adjustment screws.
10. Open the perimeter panel and mark the two holes for nal xing of the hood.
11. Remove the hood from the wall.
12. Drill the holes marked previously.
13. Insert the wall plugs.
14. Reattach the hood to the wall.
15. Fix the hood to the wall using two screws and two washers.
16. Filter Version only - Fit the plastic grille over the hood air outlet hole.
17. Extractor Version only - Fit the collar onto the hood air outlet hole.
18. Fit the power cable in the special housing.
19. Secure the cable to the cable clamp.
IMPORTANT: This operation is compulsory. It will prevent accidental disconnection of the power cable.
Carry out the connection to the household electrical system.
20. Extractor Version only - Connect an exhaust pipe to the collar for the expulsion of fumes.
21. Filter Version with ues only - Fix the deector to the ue support bracket and connect the exhaust pipe to the
deector.
22. Filter or Extractor Version with ues only - Fit the ues in the relevant seat above the hood.
23. Filter or Extractor Version with ues only - Slide the top section upwards and x the ues with two screws as
shown.
24. Filter Version only - Fit the carbon lter onto the back of the grease lter, hooking it with the two rods.
25. Fit the grease lter and close the front panel.
Check for correct hood operation, referring to the hood description and use section.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AKR 8081 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AKR 8081 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AKR 8081

Whirlpool AKR 8081 User Manual - German - 20 pages

Whirlpool AKR 8081 User Manual - Dutch - 20 pages

Whirlpool AKR 8081 User Manual - French - 20 pages

Whirlpool AKR 8081 User Manual - Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info