133047
13
Zoom out
Zoom in
Previous page
1/16
Next page
5019 318 33271
INSTALLATION - ASSEMBLY INSTRUCTIONS
The hood is designed for operation in filter version only: the air is filtered through a carbon filter and recycled in the
room.
The hood is supplied with fixing plugs suitable for most types of walls/ceilings. However, it is necessary to contact a qualified
technician to ascertain the suitability of the materials according to the type of wall/ceiling. The wall/ceiling must be strong
enough to take the weight of the hood.
Fig. 2
Place the template (Fig. 2) supplied on the ceiling directly above the cooktop, matching the centre of the template (R1) with
the centre of the cooktop (R2).
The sides of the template must be parallel to the sides of the cooktop.
Note: The side of the template with the wording “FRONT” corresponds to the hood controls side.
Drill the holes indicated on the template, and insert the plugs. Remove the template.
Fig. 3
Prepare the support bracket A, suitably adjusting the length of the cables according to the following formula:
L (cm)= X-Y-H+3 cm
L = length of cables.
X= distance between ceiling and the cooktop surface.
Y = height of hood body.
H = minimum installation height between the cooktop surface and bottom part of the hood.
After finding the right length, slide the lock nuts along the cables (Fig.3b) until reaching the required length then clamp them
on the cable with a spanner (Fig. 3c).
Important: Respect the minimum distance from burners, indicated on the first page of the manual.
Fig. 4
After preparing the electrical connection, fit the support bracket to the ceiling, running the cables for electrical connection
through the middle hole
Fix with 3 screws.
Important: Detail A (support bracket) is equipped with a wire (yellow-green) which must be connected to the earth of the
house electrical system.
Fig. 5
Fix the hood to the hooking brackets and secure with 1 screw for each bracket (COMPULSORY FIXING).
Fig. 6
Adjust the position of the hood by means of the adjustment screws.
Fig. 7
Insert the control rod in the special seat.
Note! Compulsory coupling direction, with release.
Fig. 8
Fix the connection box to the support bracket on the ceiling with 2 screws.
Carry out the electrical connection and secure the cables with the cable clamp and 2 screws.
Fix the connection box cover with 4 screws.
Important: Replacement of the interconnection cable must be carried out by the authorised after-sales technical service.
Fig. 9
Insert the cover C between the support cables, making sure they enter the slots provided on the cover.
Important: Leave enough cable so that it passes easily through the slot obtained in the cover.
Secure the cover with 3 grub screws already screwed on the support bracket A.
Note: The 3 fixing screws secure the cover by the friction they exert on the cover itself, and therefore must not be completely
tightened.
Fig. 10
Fit the carbon filter, on the back of the grease filter, with the special elements F. Insert the grease filter + carbon filter assembly
on the hood.
IF NL E PGBD GR
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool akr 806 ix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool akr 806 ix in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool akr 806 ix

Whirlpool akr 806 ix User Manual - German - 16 pages

Whirlpool akr 806 ix User Manual - Dutch - 5 pages

Whirlpool akr 806 ix User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info