The instructions below, to be carried out in the order in which they are numbered, refer to the figures (with the same step numbers) given on the last pages of
this manual.
1. Feed through the power supply cable and secure the cable clamp (using n.1 screw 3.5x9.5).
2. Position the wall unit shelf at a height of 26 cm from the bottom.
3-4-5. Position the drilling template on the bottom of the shelf, drill the 4 Ø 5mm side holes and prepare the central opening for the air vent.
6. For the upper outlet:drill the top of the wall unit, taking into account the position of the outlet hole.
7. For the rear outlet:drill the back of the wall unit in the middle at the desired height.
8. Secure the hood to the wall unit using the 4 screws 4.2x35.
8-10.Fit ducting for the venting of fumes, connecting it to the collar (for the Filter version, a small section of ducting that reaches the top of the wall unit will
suffice).
N.B.:The pipe is not included in the pack and must be purchased separately.
11. Open the steam deflector and remove the metal grease filters.
12. Install the brackets for adjusting the deflector.
13. For Filter Version only: fit the carbon filter (refer to instructions in the section MAINTENANCE-Carbon Filter).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Whirlpool AKR 4731 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Whirlpool AKR 4731 in the language / languages: English as an attachment in your email.
The manual is 0,68 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
