-If knobs on your oven are retractable, push them in the middle and they pop up.
-Your product may appear slightly different from the drawing.
1.Function selector knob
2.Thermostat knob
3.Red thermostat led
4.Hob control knobs
5.Electronic programmer
SWITCHING ON THE OVEN
Turn the selector knob to the required function. The oven light switches on.
Turn the thermostat knob clockwise to the required temperature. The red thermostat led lights up (except for the defrost function), switching off again when the oven
reaches the selected temperature. At the end of cooking, turn the knobs to “0”.
HOW TO USE THE HOB
The oven control panel features 4 adjustable knobs for cooktop operation. The cooktop control knobs are marked with a numerical scale corresponding to different
power settings, and a series of function symbols (see the instructions supplied with the hob).
IMPORTANT:
•When using the cast iron hotplates for the first time, set the knobs to 6 and allow them to operate for approx. 3 minutes in order to eliminate odours, placing a pot
with an appropriate diameter and half full of water on each hotplate.
•Do not leave the hot plates turned on when they are empty.
•Use pots and pans specifically designed for electric hobs, particularly those with multiple layer flat-bottoms.
•Use pans whose bottom diameter is equal to that of the hotplates, or slightly larger.
USING THE ELECTRONIC PROGRAMMER
Using the oven for the first time
Setting the time of day and the tone of the acoustic signal.
Upon connection of the oven to the mains power supply, AUTO and 0.00 flash on the display. To set the time of day, press buttons – and + at the same time: the central
dot flashes. Set the time of day using the buttons + and –. Having selected the desired value, press the middle button. The display shows “ton 1”. To select the desired
tone, press button –. Having selected the preferred tone, press the middle button. To change the time of day, proceed as described above.
Setting the timer
To set the timer, long-press the middle button: the display shows 0.00 and the bell symbol flashes. Set the timer using the button + (the maximum programmable
value is 23 hours and 59 minutes). The countdown begins after a few seconds. The display shows the time of day and the bell remains lit, confirming the timer has been
set. To view the countdown and change it if necessary, press the middle button again.
1.Button – : to decrease the value shown on the display
2.Button : for selecting the various settings:
a. Timer
b. Cooking time
c. Cooking end time setting
3.Button + : to increase the value shown on the display
A. The symbol indicates that the timer function is in operation
B. The AUTO symbol confirms the setting has been made
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Whirlpool AKP 732 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Whirlpool AKP 732 in the language / languages: English as an attachment in your email.
The manual is 2,42 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
