Crockery and cutlery...Possible causes...Solutions...
...have discoloured plastic parts-Tomato/Carrot juice.-Tomato sauce, for example, can lead to discolouring of plastic parts. Powder detergent is
recommended as it allows slightly higher doses to be used for improved whitening. Programs
with higher wash temperatures should be used.
...opaque glasses, etc.-Dishes unsuitable for washing in dishwashers
(porcelain),
-Only use dishwasher-proof crockery and dishes.
...removable deposits on glasses-Usage of incorrect programs for glasses.-Dishes should be put together, to avoid touching each other. Do not put glassware together
in baskets. Use suitable program for glass.
...glasses not sparkling-Glasses unsuitable for washing in dishwashers
(porcelain).
-Some kinds of glass cannot be washed in the dishwasher.
...permanent deposits on glasses-Rainbow effect.-This phenomenon is irreversible. We recommend in future:
-Change the control of system of dosage of softener.
-For combined action tablets see detergent producer’s recommendations.
...tea cups darken and dirt does not
disappear after washing in dishwasher
-Theine present in black tea.
-In case of tea stains, to enhance bleaching add one teaspoon of baking soda together with
detergent into detergent dispenser.
...rust marks-Pre-wash program not used.-Salty or acidic food residues can cause rust marks even on stainless steel cutlery. To avoid
this, always use the Pre-wash program if the dishes are to be washed later.
...other marks-Rinse aid dosage too low.-In the presence of marks, increase the rinse aid dosage (see page 4, “Adding rinse aid”).
-If you use a combined action detergent, try adding more rinse aid.
...streaks-Rinse aid dosage too high.-In the presence of streaks, reduce the rinse aid dosage (see page 4, “Adding rinse aid”).
-If you use a combined action detergent which includes rinse aid, do not add any additional
rinse aid.
...suds-Unsuitable dosage of detergent/rinse aid.-Only use the amount of detergent/rinse aid required, since excessive amounts can lead to
excess suds.
If, after carrying out the above checks, the fault persists, disconnect the mains plug and turn off the water tap. Contact the After-sales Service (see warranty).
Before contacting our After-Sales Service, take note of the following:
- the description of the fault,
- the appliance type and model,
- the service code (the number indicated on the adhesive rating plate) inside the door
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Whirlpool ADPU 603 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Whirlpool ADPU 603 in the language / languages: English as an attachment in your email.
The manual is 4,48 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
