651161
2
Zoom out
Zoom in
Previous page
1/8
Next page
2
ADVICE REGARDING THE FIRST TIME USE
After installation, remove the stoppers from the racks and the reta-
ining elastic elements from the upper rack.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes
and on the machine’s functional components.
It is important that the salt reservoir be never empty (except when
the water hardness is set to - 1 “Soft”).
It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher (see
Product Description) and should be lled when the SALT REFILL indi-
cator light
in the control panel is lit .
1. Remove the lower rack and unscrew the
reservoir cap (anticlockwise).
2. Position the funnel (see gure) and ll the
salt reservoir right up to its edge (approxi-
mately 1 kg); it is not unusual for a little wa-
ter to leak out.
3. Remove the funnel and wipe any salt resi-
due away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get
into the container during the wash program (this could damage the
water softener beyond repair).
Whenever you need to add salt, we recommend carrying out the
procedure before the washing cycle is started.
SETTING THE WATER HARDNESS
To allow the water softener to work in a perfect way, it is essential
that the water hardness setting is based on the actual water hard-
ness in your house. This information can be obtained from your local
water supplier.
The factory setting is for avarage (3) water hardness.
1. Switch on the appliance by pressing the ON/OFF button
2. Switch o the appliance by pressing the ON/OFF button
3. Hold down button START/PAUSE for 5 seconds, until you hear a
beep.
4. Switch on the appliance by pressing the ON/OFF button
5. The current selection level number and the salt indicator light
both ash.
6. Press button P to select the desired hardness level (see Water
Hardness Table).
7. Switch o the appliance by pressing the ON/OFF button
Setting is complete!
As soon as this procedure is complete, run a program without loading.
Only use salt that has been specically designed for dishwashers.
After the salt has been poured into the machine, the SALT REFILL in-
dicator light switches o.
If the salt container is not lled, the water softener and the
heating element may be damaged as a result (except when
the water hardness is set to - 1 “Soft”).
FIRST TIME USE
SALT, RINSE AID AND DETERGENT
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser B
should be lled:
When the RINSE AID REFILL indicator light
on the display is lit.
When the dark optical indicator on the dispenser door C becomes
transparent.
1. Open the dispenser by turning the cap A in an anticlockwise direction.
2. Pour in the rinse aid, making sure it does not overow from the
dispenser. If this happens, clean the spill immediately with a dry cloth.
3. Screw the cap back on.
NEVER pour the rinse aid directly into the dishwasher.
ADJUSTING THE DOSAGE OF RINSE AID
If you are not completely satised with the drying results, you can
adjust the quantity of rinse aid used. Turn the adjuster D”.
The factory setting is for a medium level.
If you see bluish streaks on the dishes, set a low number (1-2).
If there are drops of water or limescale marks on the dishes, set a
mid-range number (3-4).
FILLING THE DETERGENT DISPENSER
Open the detergent dispenser and measure out the detergent
according to Programs Table
A Rinse aid dispenser cap
(Unscrew the cap to ll the dispenser).
B Rinse aid dispenser
C Rinse aid level indicator
D Rinse aid dosage adjuster
(You can set up to a max. of 4 levels).
E Lid opening button
(Press to access the containers)
F Cover (Detergent containers)
Remove detergent residues from the edges of the containers
before closing the cover until it clicks.
G Pre-wash detergent container
Detergent for pre-wash (pour in the powder or liquid detergent
after consulting the Programs Table).
H Wash detergent container
Detergent for wash (pour in the powder, liquid or tablet detergent
after consulting the Programs Table).
The detergent dispenser automatically opens up at the right time ac-
cording to the program.
Only use detergent which has been specically designed for
dishwashers. DO NOT USE washing up liquid.
A
B
DCGH
F
E
Water Hardness Table
Salt
needed
Level
°dH
German degrees
°fH
French degrees
1 Soft 0 - 6 0 - 10 NO
2 Medium 6 - 11 11 - 20
YES
3 Average 12 - 17 21 - 30
4 Hard 17 - 34 31 - 60
5 Very hard 34 - 50 61 - 90
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool ADP 502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool ADP 502 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool ADP 502

Whirlpool ADP 502 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info