Manual Whirlpool ADP 301 (page 36 of 84) (English, Dutch, French, Italian, Polish)

651156

Zoom out

Zoom in

1/84

Notes:

Optimumperformancelevels when using the“1Hour” and

“Rapid”cyclescan be achieved byrespectingthe specified

number of place settings.

To reduce consumption even further, only run the dishwasher

when it is full.

Note for Test Laboratories: forinformationoncomparativeEN

testing conditions, please send an email to the following address:

contact@whirlpool.com

Special wash cycles

and Options

Half Load option

If there are not many dishes to be washed, a half

load cycle may be used in order to save water, electricity and

detergent.SelectthewashcycleandpresstheHALFLOAD

button: the indicator light will illuminate.

PresstheHALFLOADbuttontodeselectthisoption.

Remember to halve the amount of detergent.

Sani Rinse Option

This option allows higher temperatures to be used.

Selectthewashingprogram,presstheSaniRinsebuttonand

the indicator light will switch on. To deselect the option, press

the same button again.

Ideal to clean crockery and feeding bottles.

Warning:thecrockeryandplatescouldbeextremelyhotat

the end of the cycle.

TheSaniRinse option results in lengthening ofthewash

cycle.

Drain out

To stop and cancel the active cycle, the Drain Out

function can be used.

AlongpressofSTART/PAUSEbutton,willactivatetheDRAIN

OUT function. The active cycle will be stopped and the water in

the dishwasher will be drained out.

Child safety lock

Alongpress of HALF LOADbutton, will activate the

SAFETYLOCKfunction.TheSAFETYLOCKfunctionwillblockthe

controlpanel.TodeactivatetheSAFETYLOCK,longpressagain.

Tablet option (Tab)

AlongpressoftheSaniRinsebutton,willactivatethe

TABLET function. This option optimises washing and drying

results. To deactivate the TABLET, long press again.

The “Tablet” option results in a longer wash cycle.

Wash options

The OPTIONS may only be set, changed or reset after the

wash cycle has been selected and before the Start/Pause

button has been pressed.

Only the options which are compatible with the type of wash

cycle set may be selected. If an option is not compatible

with the selected wash cycle

(seeTableofwashcycles)

, the

correspondingled/symbolflashesrapidly3times.

If an option is selected which is not compatible with another

(previouslyselected)option,itwillflash3timesandswitch

off, while the most recently selected option will remain active.

To deselect an option which has been set by mistake, press

the corresponding button again.

Delayed start

The start of the program may be delayed for

a period of time between 0:30 and 24 hours.

1.Select theprogramandanydesired options.Pressthe

DELAYEDSTARTbutton(repeatedly)todelaythestartof

theprogram.Adjustablefrom0:30to24hours.

With each press of the button, the delay start increases by:

0:30 if selection below 4 hours, 1:00 if selection is below

12hours,4hoursifselectionisabove12hours.If24hours

reached, and the button is pressed, the delayed start is

deactivated.

2. Press the START/PAUSE button: the timer will begin

counting down;

3.Oncethistimehaselapsed,theindicatorlightswitches

off and the program begins automatically. If at the time of

thecountdowntheSTART/PAUSEbuttonispressedagain

the DELAYEDSTART option is cancelled and the selected

program starts automatically.

The Start Delay function cannot be set once a wash cycle

has started.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool ADP 301 in the language / languages: English, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 17,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whirlpool ADP 301 Manual

Product: