Manual Whirlpool ADP 252 WH (page 5 of 8) (English)

450667

5

Zoom out

Zoom in

Previous page

1/8

Next page

14

To ensure the dishwasher works at its best, soft

water, i.e. water that is lime-free, is required. The

presence of lime in tap water causes water stains

due to calcium deposits on crockery and glasses.

A water softening system has been built in the

dishwasher to ensure a steady supply of soft

water. This is basically a decalcifying system,

which needs to be regenerated regularly using

special dishwasher salt.

Setting the correct water hardness level:

Set the water hardness level by turning the

selector fitted on the left-hand side of the inner

appliance wall by using a coin. Use the table

below to set the dial to the correct setting:

If the water hardness level falls within category 1

(soft), no salt is required.

To find out the waterhardness level of water in

your area contact your local Water Board or

check the last bill you received.

If provided, a simple test can be employed to set

the hardness level using the hardness test strip.

• Dip the test strip into a glass of water from the

tap.

• Wait for 3 seconds, withdraw the strip from

the water.

• Wait for 1 minute.

• If all the three test squares are still green, set

the hardness selector to 0, and disregard all

instructions about salt usage.

• If one of the test squares becomes red, set

the selector to 1.

• If two of the test squares become red, set the

selector to 2.

• If all of the test squares become red, set the

hardness selector to 3.

How to fill the salt container:

Warning: only use dishwasher salt!

Do not fill the salt container with

unsuitable substances, such as

detergent, as this will cause irreparable

damage to the water softener system.

1. Remove the lower rack.

2. Unscrew the cap by turning it counter-clockwise.

3. When first using the dishwasher: fill the salt

container with approximately 1 litre of water.

4. Fill the salt container to the rim with salt

(using the funnel provided) (when filling for

the first time use min. 1.5 kg and max. 2 kg)

and stir with a spoon handle.

5. Screw the cap back on by turning it

clockwise.

6. Fit the lower rack.

7. After filling the regeneration salt container,

immediately

start a wash programme (the

Prewash programme alone is not sufficient),

so as to eliminate any residual saline solution

straight away and avoid corrosion.

Check the salt level regularly.

Salt level indicator:

The dishwasher is equipped with an electric or

visual salt level indicator (depending on the

model installed).

Electric indicator:

The salt level indicator lamp on the control panel

lights up when the salt container is empty.

Visual indicator:

The green float is clearly visible in the cap

window when the salt container is sufficiently full.

The green float drops and is no longer visible

when the salt container needs to be refilled.

HOW TO FILL THE SALT CONTAINER

Water

hardness

category

German

degrees

°dH

French

degrees

°fH

Position

of the

selector

1 0 - 6 0 - 11 0

2 7 - 13 12 - 23 1

3 14 - 20 24 - 36 2

4 21 - 35 37 - 63 3

9LVXDOLQGLFDWRU

)XOO

(PSW\

1

The mash. Takes water put does not start to wash

Submitted on 19-5-2023 at 12:23
Reply Report abuse
Is the whirlpool dishwasher model ADP 252 WH a 13 or 14 Submitted on 30-11-2022 at 19:33
Reply Report abuse
No water coming into machine. Have cleaned inlet filter and made sure the tap is open. Is there a solenoid inside that could be stuck? Submitted on 13-4-2022 at 13:15
Reply Report abuse
The dishwasher does not let water in at all. After machine is switched on - no water comes into the machine to wash the dirty dishes and cutlery. Submitted on 9-1-2021 at 20:46
Reply Report abuse
On the inside left of the machine is a switch marked from 1 to 5. What is it used for? Submitted on 6-5-2020 at 16:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Whirlpool ADP 252 WH at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool ADP 252 WH in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool ADP 252 WH

Whirlpool ADP 252 WH Quick start guide - English - 4 pages

Whirlpool ADP 252 WH User Manual - German - 7 pages

Whirlpool ADP 252 WH User Manual - Dutch - 7 pages

Whirlpool ADP 252 WH User Manual - French - 7 pages

Whirlpool ADP 252 WH User Manual - Italian - 7 pages

Whirlpool ADP 252 WH User Manual - Portuguese - 7 pages

Whirlpool ADP 252 WH User Manual - Spanish - 7 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info