123721
4
Zoom out
Zoom in
Previous page
1/4
Next page
WH/IV/GB
What to do if...
If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem (* see
also the corresponding chapter in the user instructions).
Problem Cause Remedy
The appliance is not
working
No water supply. Open the tap.
The appliance does not load sufficient
water.
Clean the water supply tap filter.
Ensure there are no kinks in the water hose.
There is a power failure. Insert the plug into the mains socket.
Press the Start button.
Close the door.
Check the safety circuit breaker.
Starting the selected programme. The programme can be set to “0” to start.
If crockery is not
perfectly dry
Insufficient rinse aid. •Increase dosage *.
Residual water in cavities. Load crockery at an angle.
If crockery is not
perfectly clean
The water jet does not reach the
crockery.
Arrange crockery so that items do not touch each
other. Load crockery upside down.
Insufficient detergent. Follow recommended detergent dosage.
Unsuitable programme. Select a more intense wash cycle.
Spray arms blocked. The spray arms must be able to turn freely.
Spray arm nozzles clogged. Remove any impurities obstructing the water flow *.
Incorrect detergent/detergent too old. Use a good quality detergent.
Sandy or grainy
residues
Clogged filters. Check filters regularly/if necessary clean *.
Filters incorrectly assembled. Insert the filter correctly *.
Colour of plastic parts
faded
Tomato/carrot juice, ... Depending on the material, if necessary use a
detergent with a greater whitening power.
Deposits on crockery
•Removable Streaks on the crockery/glasses. Increase the rinse aid dosage *.
Streaks on glasses. Reduce the rinse aid dosage *.
Layer of salt on crockery/glasses. Close the salt container lid properly *.
Not removable Insufficient water softening, calcium
deposits.
Change water hardness setting, if necessary add salt *.
Opaque glasses/ glasses
not sparkling
Cannot be washed in the dishwasher. Use suitable glasses.
Rust on cutlery
Not made of stainless steel. •Use suitable cutlery.
Identifying appliance
faults
The START indicator lamp flashes.
Indicator F... (if provided).
Ensure the filter assembly is not clogged and that
there is no interruption to the water supply
(if necessary, clean the filters *). Start the programme
again. Press the START button for 2 seconds, until the
START indicator lamp switches off. Select a new
programme and press the Start button again.
If after carrying out the above checks the malfunction persists or appears again, turn the appliance off and turn off the water
supply tap, then call our After-Sales Service (see guarantee).
Before contacting our After-Sales Service, take note of the following:
The nature of the fault
The appliance type and model
The service code (the number indicated on the adhesive rating plate)
inside the door on the right-hand side.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool adg 8315 ix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool adg 8315 ix in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool adg 8315 ix

Whirlpool adg 8315 ix User Manual - English - 9 pages

Whirlpool adg 8315 ix Installation Guide - German - 4 pages

Whirlpool adg 8315 ix User Manual - German - 9 pages

Whirlpool adg 8315 ix Installation Guide - Dutch - 4 pages

Whirlpool adg 8315 ix User Manual - Dutch - 8 pages

Whirlpool adg 8315 ix Installation Guide - French - 4 pages

Whirlpool adg 8315 ix User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info