Remove one screw from the switch housing mounting plate (1) and loosen the other two.
Note: Make sure the upper and lower four decorative pillars are aligned, need to remove the one of screws, which is marked with an arrow label.
Eine Schraube von der Montageplatte des Schaltergehäuses (1) entfernen und die anderen beiden Schrauben lockern.
Hinweis: Stellen Sie sicher, dass die oberen und unteren vier Zierstützen ausgerichtet sind. Dazu die Schraube entfernen, die mit einem Pfeilschild gekennzeichn ist.
Eine Schraube von der Montageplatte des Schaltergehäuses (1) entfernen und die anderen beiden Schrauben lockern.
Note : Assurez-vous que les quatre piliers décoratifs supérieurs et inférieurs sont alignés. Il vous faut retirer l'une des vis, marquée d'une légende fléchée.
Rimuovere una vite dalla piastra di montaggio del vano interruttore (1) e allentare le altre due viti.
Nota: assicurarsi che i quattro pilastri decorativi superiore e inferiore siano allineati, è necessario rimuovere quello delle viti, che è contrassegnato da un’etichetta a
freccia.
Verwijder één schroef van de montageplaat (1) van de schakelaarbehuizing en draai de andere twee los.
Opmerking: Zorg ervoor dat de bovenste en onderste vier decoratieve pijlers zijn uitgelijnd, er moet één van de schroeven worden verwijderd, die is gemarkeerd
met een pijllabel.
Quite uno de los tornillos de la placa del alojamiento del interruptor (1) y afloje los otros dos.
Nota: Asegúrese de que los cuatro pilares decorativos superiores e inferiores estén alineados, siendo necesario quitar uno de los tornillos (el identificado con una
etiqueta con una flecha).
Retire um parafuso da placa de montagem da caixa do interruptor (1) e desaperte os outros dois.
Nota: Certifique-se de que os quatro pilares superior e inferior decorativos estão alinhados, devendo se necessário retirar um dos parafusos, assinalado com uma
seta amarela.
Fjern en skrue fra bryterhusets monteringsbrakett (1) og løsne de andre to skruene.
Merk: Forsikre deg om at de fire øvre og nedre dekorative søylene er på linje, du må fjerne den ene av skruene som er merket med en piletikett.
Ta bort en skruv från motorhusets monteringsplatta (1) och lossa de andra två skruvarna.
Obs: Se till att de övre och nedre fyra dekorativa pelarna ligger i linje, måste ta bort en av skruvarna, som är markerad med en piletikett.
Irrota yksi ruuvi kytkinkotelon kiinnityslevystä (1) ja löysää kahta muuta ruuvia.
Huomaa: Varmista, että neljä ylempää ja alempaa koristetukea on suunnattu- Poista sitä varten nuolella merkityt ruuvit.
Fjern en skrue fra afbryderhusets monteringsplade (1) og løsn de to andre.
Bemærk: Sørg for, at de øverste og nederste fire dekorative piller er justerede, skal fjerne en skrue, der er markeret med en pil.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Westinghouse Oscar at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Westinghouse Oscar in the language / languages: All languages as an attachment in your email.
The manual is 3,71 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
