24538
15
Zoom out
Zoom in
Previous page
1/25
Next page
15
7. Select the desired options
The light corresponding to the depressed button
illuminates.
8. Select the DELAY START option
To delay starting of the program, press the DELAY
START button (the corresponding light illuminates).
The figures corresponding to the selected delay will
be displayed for about 3 seconds, after which the
duration of the selected program will appear on the
display.
During this period it is possible to load other laundry:
• depress START/PAUSE button;
• open the door:
• load laundry;
• close the door and depress START/PAUSE button
again.
9. Start the program
Press the START/PAUSE button. The relevant light
will stop flashing, and only the light relevant to the
phase in progress will remain lit.
If you have chosen a delayed start, the washing
machine will begin the countdown.
The display will show the duration of the program or
the selected delay.
10. Altering a program
You can alter the program before it starts.
When the program has started, you can only reset it
by turning the program selector dial to OFF, you can
then select a new program. Start it by depressing the
START/PAUSE button.
DELAY
START
SUPER
RINSE
RINSE
HOLD
EASY
IRON
QUICK
WASH
PRE-
WASH
11. Interrupting a program
Depress the START/PAUSE button to interrupt the
running program, the corresponding light will flash,
press the START/PAUSE button again to restart the
program.
12. Cancelling a program
Turn the selector dial to OFF to cancel a program
which is running. Now you can select a new
program.
13. Opening the door after the program
has started
Pause the machine by pressing the START/PAUSE
button.
If the door does not open, this means the machine is
already heating, the water level is above the bottom
edge of the door or the drum is turning.
If you can not open the machine door, but need to,
switch off the machine by turning the selector dial to
OFF. After about 3 minutes the door can be opened
(pay attention to the water level and temperature!).
To restart turn the selector dial to the previous
program selected (select also the options) and press
the START/PAUSE button.
14. At the end of the program
The machine stops automatically.
If the RINSE HOLD option has been selected the
door remains locked, the light of the START/PAUSE
button goes off, RINSE HOLDING pilot light and
RINSE HOLD light remain alight, to indicate that the
water must be drained before opening the door. The
display shows a blinking zero.
Turn the program selector dial to Reset OFF to
switch the machine off .
Remove the laundry from the drum and carefully
check the drum is empty to avoid any forgotten items
being damaged in a subsequent wash (e.g shrinking)
or their colour running into a load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
132990940.qxd 04/06/2004 08:40 Pagina 15 (Nero/Process Black pellicola)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Westinghouse LF652D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Westinghouse LF652D in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info