24538
9
Zoom out
Zoom in
Previous page
1/25
Next page
9
To complete the cycle there are two possibilities to
choose from:
- Select the DRAIN program :
the water is emptied out without spinning.
- Select SPIN or DELICATE SPIN programs.
Select the spin speed by means of the relevant
button and then depress the START/PAUSE
button. The water is drained and garments spun
to the selected spin speed.
Attention!
Before selecting program DRAIN, SPIN or
DELICATE SPIN, the selector dial has to be
positioned on OFF.
7 SUPER RINSE button
This option can be selected with all programs, except
the wool program. The machine will add 2 rinses to
the selected program.
This option is recommended for people who are
allergic to detergents, and areas where the water is
very soft.
8 DELAY START button
The wash program can be delayed for 30min - 60min
- 90min, 2 hours and then by one hour up to a
maximum of 23 hours by pressing the DELAY
START button.
Selecting delay start
• Select the program and the required options.
• Select delay start.
• Depress START/PAUSE button: the machine starts
its hourly countdown.
The program starts once the selected delay start has
expired.
Cancelling delay start
• Depress START/PAUSE button .
• Depress the DELAY START button until the symbol
0’ is displayed.
• Depress the START/PAUSE button again to restart
the program.
Important
You can alter delay start at any moment, before you
press START/PAUSE button.
If you have already depressed the START/PAUSE
button, the delay start can be changed after selecting
the wash program again.
9 TIME SELECTING / REMAINING
(Display)
The display shows the following information:
Cancelling – Duration of the program – Delayed
start – Incorrect option selection – Alarm code –
End of program.
If a program has been cancelled (the program dial is
on OFF position, all the lights and the display will
turned off.
After selecting a program, the duration is displayed
in hours and minutes (for example 2.05).
The duration is calculated automatically on the basis
of the maximum recommended load for each type of
fabric.
After the program has started, the time remaining is
updated every minute.
The selected delay (23 hours max) appears on the
display for 3 seconds, then the duration of the
previous program is displayed.
The count down is updated every hour.
Delayed start
2.05
Duration of the selected program
Cancelling
132990940.qxd 04/06/2004 08:40 Pagina 9 (Nero/Process Black pellicola)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Westinghouse LF652D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Westinghouse LF652D in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info