Manual Westinghouse LF652D (page 6 of 25) (English)

24538

Zoom out

Zoom in

1/25

The inlet hose must not be lengthened. If it is too

short and you do not wish to move the tap, you will

have to purchase a new, longer hose specially

designed for this type of use.

Important!

Before connecting the machine to new pipework or

pipework which has not been used for sometime, run

a reasonable amount of water to flush out any

debris that may have been collected in the pipes.

Water drainage

The end of the drain hose can be positioned in four

ways:

Hooked over the edge of a sink using the plastic

hose guide supplied with the machine. In this

case, make sure the end cannot come unhooked

when the machine is emptying.

This could be done by tying it to the tap with a piece

of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be

above the tap so that the bend is at least 60 cm

above the ground.

Directly into a drain pipe at a height of no less

than 60 cm and no more than 90 cm.

The end of the drain hose must always be

ventilated, i.e. the inside diameter of the drain pipe

must be larger than the outside diameter of the drain

hose.

Floor drain: the washing machine should be

installed where a floor drain or hole is located

(depending on plumbing regulations). A floor drain is

required to drain away water which may overflow

from the washing machine due to a hose leak or

malfunction.

P0022

The drain hose must not be kinked. Run it along the

floor; only the part near the drainage point must be

raised.

The drain hose may be extended to a maximum of 4

metres. An additional drain hose and joining piece

is available from your local Service Centre.

For correct operation of the machine, the drain

hose must remain hooked to the correct support

piece situated on the top of the back side of the

appliance.

Electrical connection

Plug the washing machine into a properly earthed 3

pin power point.

DO NOT USE AN EXTENSION CORD.

CAUTION !

If the appliance is supplied from a cord extension

set to an electrical porthole outlet device, the

cord extension set or electrical portable outlet

device must be positioned so it is not subjected

to splashing or ingress of moisture.

The manufacturer declines any responsibility

for damage or injury through failure to comply

with the above safety precaution.

IMPORTANT!

If the electrical cord of this appliance is

damaged, it must be replaced by the

Manufacturer, Authorised Service Agent or

similarly qualified person in order to avoid a

hazard.

P1118

132990940.qxd 04/06/2004 08:40 Pagina 6 (Nero/Process Black pellicola)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Westinghouse LF652D in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Westinghouse LF652D Manual

Product: