683225
9
Zoom out
Zoom in
Previous page
1/41
Next page
MY BOOK PRO
USER MANUAL
ABOUT YOUR WD STORAGE DEVICE – 5
warning. To avoid the warning, perform the operating system’s safe removal action
before powering down the device.
If you leave the device connected to your computer after forcing a power-down, you
must press the power button again to power it back up. Unlike a safe power-down
function, disconnecting and reconnecting the USB interface cable will not power the
device back up.
Power button illumination shows the device status as follows:
USB Hub Connectors
Use the two front-panel USB hub connectors for additional devices.
Drive Status LEDs
The drive 1 and drive 2 status LEDs show each drive’s status as follows:
Drive Door Latches
The drive door latches provide quick and easy access to the internal hard drives. Just lift
the latch lever and lower the drive door to remove and replace a drive.
Reset Button
Use the reset button to force a device reset.
Thunderbolt Interface Ports
Performance—Thunderbolt technology delivers unprecedented data transfer rates
thanks to its revolutionary bidirectional I/O throughput. Each Thunderbolt port
provides a bidirectional channel with up to 20 Gb/s of bandwidth.
Simplicity—Thunderbolt technology supports daisy chaining multiple devices
through a single Thunderbolt connector so you can multitask at Thunderbolt
technology speed without having to use a switch or hub.
Flexibility—Connect additional Thunderbolt technology-enabled external hard
drives, media players, HD displays, media capture and editing systems, and more
through a single connector.
LED Appearance Status
White, on steady Powered up/on and ready
White, pulsing dim System standby
Red, flashing Powered up with a degraded RAID volume or other failure condition
Off Powered down/off
LED Appearance Status
White, on steady Idle
White, flashing Drive activity
Red, on steady Drive fault/failure condition or the RAID volume is missing
Off No drive installed
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Western Digital My Book Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Western Digital My Book Pro in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Western Digital My Book Pro

Western Digital My Book Pro User Manual - German - 41 pages

Western Digital My Book Pro User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info