784856
49
Zoom out
Zoom in
Previous page
1/108
Next page
47
TOO MUCH WATER ON
DISPLAY
WIPE SCREEN
This message appears when too much
water is detected on the touch screen.
Simply wipe away excess water.
Error messages on the screen list and definitions:
http://geckokeypads.com/k1000errormessages
INSTALLATION ERROR MESSAGES
Upon connecting Smart Touch to your spa system you may see one of two error
messages. Please follow the instructions in the message or contact your dealer for
more information.
SMART WINTER MODE SWM
There is a thermometer sensor in the control unit that mea-
sures the temperature of the machinery. It monitors how cold
it is outside the cover - including the insulation - and turns
on the motors from time to time to direct hot water into the
machinery to avoid freezing.
USER INTERFACE  SMART TOUCH
The SWM (Smart Winter Mode) will not turn on if the sensor measures above 21C.
However, if it falls below that, it will turn on for 24 hours.
– if it measures 20-16 degrees, it will run the motors for 1 minute every 2 hours.
– if it measures 15-13 degrees, it will run the motors for 1 minute every hour.
– if it measures 12-11 degrees, it will run the motors for 1 minute every 30 minutes.
– if it measures 10 degrees (or less), it will run the motors for 1 minute every 15 minutes.
This is a safety function which cannot be turned off!
WARM WEATHER FUNCTION
During the filtration cycle, the kinetic heat generated by
the circulating motors is transferred to the pool water, so
the pool water temperature can possibly rise above the set
temperature on the control panel. The control unit continu-
ously monitors the water temperature during the filtration
cycle and if it rises above the set temperature by more than 3
degrees celsius, it automatically shortens the duration of the
filtration period so the water does not overheat.
Besides continuously measuring the water temperature, it
automatically changes the duration of the filtration period,
but filters for at least 4 hours if the spa is equipped with a
circulating motor, or for at least 2 hours if the water is filtered
by the massage motor.
This function can only be turned off on whirlpools equipped
with a colour touch screen.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wellis In.Touch2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wellis In.Touch2 in the language / languages: English as an attachment in your email.

The manual is 11.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wellis In.Touch2

Wellis In.Touch2 User Manual - German - 124 pages

Wellis In.Touch2 User Manual - Dutch - 113 pages

Wellis In.Touch2 User Manual - French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info