784856
10
Zoom out
Zoom in
Previous page
1/108
Next page
EASY 4
COMPACT FULL-FUNCTION KEYPAD
The Quick Reference Card provides an overview of your spa’s main functions and the operations accessible from your digital
keypad. This QRC depicts a generic overlay, custom versions may vary.
Set PointSmart Winter
Mode
Heater
Filter
Up
Light
Pump 1
Pump 1 Pump 2 Up/Down
DownIndicator
lights
1 PUMP MODEL
Pump 1 Pump 2 Up/Down
Up / Down
Light
Pump 2
Pump 1
2 PUMP MODEL
SPA FUNCTIONS
PUMP 1
Press Pump 1 key to turn Pump
1 on at low speed. Press a
second time to turn pump to
high speed (with a dual-speed
pump*). A third time turns
pump off. A built-in timer
automatically turns pump off
after 20 minutes, unless pump
has been manually deactivated
first.
The “Pump 1” indicator
lights up when Pump 1 is on.
With a dual-speed pump, the
indicator will flash when pump
1 is on at low speed.
* If single speed pump: press Pump key to turn pump on. Press Pump
key again to turn pump off.
OFF MODE
Pressing Pump 1 for 5 seconds
will enable the Off mode. This
mode allows you to stop all
outputs including automatic
functions such as filter cycle,
heat request and smart winter
mode for 30 minutes to per-
form quick spa maintenance.
When Off mode is active, the
display will toggle between the
“OFF” message, the clock and
the water temperature.
The spa light will flash for a
few seconds before the end
of the 30 minutes to warn you
that the system is about to
resume its normal operation.
Press Pump 1 or Pump 2 (if
available) to restart the system
before the expiration of the 30
minute delay. When the system
resumes its normal operation,
the display shows “On“ for 3
seconds.
PUMP 2 KEY
Not available on all models
Press Pump 2 key to turn Pump
2 on at low speed. Press a
second time to turn pump to
high speed (with a dual-speed
pump*). A third time turns
pump off. A built-in timer
automatically turns pump off
after 20 minutes, unless pump
has been manually deactivated
first.
The “Pump 2” indicator lights
up when Pump 2 is on. With a
dual-speed pump, the indicator
will flash when pump 2 is on at
low speed.
LIGHT KEY
Press Light key to turn light on.
A second press turns light off.
A built-in timer automatically
turns light off after 2 hours,
unless it has been manually
deactivated first.
The “Light” indicator lights up
when light is on.
UP/DOWN KEYS
Use Up or Down key to
set desired water temperature.
The temperature setting will
be displayed for 2 seconds to
confirm your new selection.
2 pump spas have a combined
Up/Down key. Hold the button
to increase the parameter and
release the button to stop. Hold
the button again to decrease
the parameter.
The "Set Point" icon indicates
that the display shows the
desired temperature, NOT the
current water temperature!
USER INTERFACE  EASY 4
Indicator
lights
8
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wellis In.Touch2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wellis In.Touch2 in the language / languages: English as an attachment in your email.

The manual is 11.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wellis In.Touch2

Wellis In.Touch2 User Manual - German - 124 pages

Wellis In.Touch2 User Manual - Dutch - 113 pages

Wellis In.Touch2 User Manual - French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info