784851
68
Zoom out
Zoom in
Previous page
1/108
Next page
9
Pairing the Spa Transmitter (CO Module) and the Home
Transmitter (EN Module)
The pairing process is used when you need to replace one module of the in.touch 2 kit. Other-
wise, the in.touch 2 arrives pre-paired from the factory.
1. Power up the Home Transmitter
2. Press on the pairing button with a paper clip
or some similar tool. When the pairing mode
is active the status LED flashes YELLOW in
a rapid pattern. The Home Transmitter is then
in pairing mode and will remain in this mode
until it pairs with an Spa Transmitter, or until it
is reset (power cycled).
3. Shut off the spa’s breaker (thus turning off
the Spa Transmitter), wait a few seconds,
and then flip the breaker back on. Within a
few seconds, the pairing operation should
complete and the Home Transmitter status
LED will no longer be YELLOW.
Note: in.touch 2 modules can be paired as often as necessary, but can only be paired with a
single counterpart module at a time. Once paired, the modules store this information permanently
until the next pairing operation. Pairing information is stored in non-volatile memory, so pairing is
not required after a power failure. Only a Home Transmitter can initiate a pairing, so it is important
that the pairing begin with putting the Home transmitter module in pairing mode.
If several spas are powered up at the same time with a Home Transmitter in pairing mode (for
instance, in a dealer showroom), only the 1st spa to successfully connect to the Home Module will
pair. As this can be random, it is recommended that only 1 spa be powered up at a time during the
pairing process.
pairing button
status LED
Main electrical box GFCI panel
OPTIONAL ACCESSORIES  IN.TOUCH 2
66
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wellis Aquasoul Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wellis Aquasoul Pro in the language / languages: English as an attachment in your email.

The manual is 11.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wellis Aquasoul Pro

Wellis Aquasoul Pro User Manual - German - 124 pages

Wellis Aquasoul Pro User Manual - Dutch - 113 pages

Wellis Aquasoul Pro User Manual - French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info