579826
21
Zoom out
Zoom in
Previous page
1/267
Next page
37
GB
Parameter menu
OFF Off
Robot output Open Menu Station parameters
The robot output is on the back of the device.
WX 1: OFF - ON - ZeroSmog - Stop&Go
WX 2 / WXD 2: OFF- Left - Right - Left & Right - ZeroSmog - Stop&Go
Option Description
Left Left tool channel (factory setting)
Right Right tool channel
Left & Right Both tool channels
ZeroSmog The rear oating switching output is closed when a tool is in use. Selected Zero Smog
extraction systems can be connected using an optional adaptor (WX HUB). The rear
RS 232 port continues to be functional.
Switching output is open in the Standby, AUTO-OFF or OFF positions, or if no tool is
inserted.
Stop&Go The rear RS232 port is used to drive an optotransmitter so that a KHE/KHP can be
activated via an optical bre.
The output is activated when a tool is used. In addition, the oating switched output is
closed. The output is OFF in the Standby, AUTO-OFF or OFF positions, or if no tool is
inserted.
Notice
If the robot is at working temperature, the display will show – ok –. Not
available with Zero Smog + Stop&Go
Footswitch (WXD 2 only + WXA 2) Open Menu Station parameters
In order to prevent the pump from starting pre-
maturely or to ensure a dened soldering-joint
preheating time, it is possible to set an ON delay.
Option Description
OFF Footswitch is off
ON Footswitch is on The front RS232 port is congured as a foot switch input for activating
the air ow.
Connecting auxiliary devices
Please observe the overview diagrams.
Auxiliary devices can be connected either to the
port on the front panel and/or to the port on the
back of the Soldering Station.
The Soldering Station detects automatically which
auxiliary device is connected. The Soldering Sta-
tion shows the symbol or name of the connected
auxiliary device on the front port or rear port.
Setting the parameters of auxiliary devices
1. Select the auxiliary device using the auxiliary
device key (front/back).
The variable parameters (e.g. speed) are dis-
played.
2. Set the required value using the turn-and-click
wheel.
3. Conrm the value with the Enter key
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weller WXA 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weller WXA 2 in the language / languages: All languages as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Weller WXA 2

Weller WXA 2 Quick start guide - All languages - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info