579826
17
Zoom out
Zoom in
Previous page
1/267
Next page
33
GB
For your safety
Carrying out a rmware update
Notice
The station must not be switched off while the
rmware update is running.
Switch off station 1.
2. Insert the memory stick into the USB port.
Switch on station 3.
The rmware update is performed automatically.
If you have a more already installed more recent
rmware on your station, this will not be changed.
Care and maintenance
Warning!
Before doing any work on the machi-
ne, pull the plug out of the socket.
Clean the operator panel, if dirty, using a suitable
cleaning cloth.
Seal ports which are not in use with covering caps.
Warning! Risk of burns
Only replace solder tips when cold
Replace and clean suction nozzles
only when hot and using the suitable
tool
Only replace hot air nozzles using
the suitable tool
Only clean or replace solder
collection tubes when cold
Filter change
Regularly check the main lter for vacuum, and
replace it if necessary.
Warning!
Working without a lter can result in irreparable
damage to the vacuum unit.
Check before starting soldering whether a main
lter is inserted.
Contaminated lters must be treated as special
waste.
Dispose of replaced equipment parts, lters
or old devices in accordance with the rules
and regulations applicable in your country.
Wear suitable protective gear.
Warning!
Use original replacement parts only.
Warranty
Claims by the buyer for physical defects are time-
barred after a period of one year from delivery to
the buyer. This does not apply to claims by the
buyer for indemnication in accordance with §§
478, 479 BGB (German Federal Law Gazette).
We shall only be liable for claims arising from a
warranty furnished by us if the quality or durability
warranty has been furnished by use in writing and
using the term „Warranty“.
The warranty shall be void if damage is due to impro-
per use and if the device has been tampered with by
unauthorised persons.
Subject to technical alterations and amendments.
For more information please visit www.weller-tools.
com.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weller WXA 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weller WXA 2 in the language / languages: All languages as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Weller WXA 2

Weller WXA 2 Quick start guide - All languages - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info