579832
9
Zoom out
Zoom in
Previous page
1/57
Next page
12 13
EN
EN
Thank you for the condence you have shown in buying this device.
The device has been manufactured in accordance with the most rigorous quality standards which ensure that
it operates perfectly.
These instructions contain important information which will help you to start up, operate and service the device
safely and correctly as well as to eliminate simple faults and malfunctions yourselves.
Read these instructions and the accompanying safety information carefully before starting up the
device and starting work with the device.
Keep these instructions in a place that is accessible to all users.
Warning!
Electric shock and risk of burns
Connecting the control unit incorrectly poses a risk of injury due to electric shock
and can damage the device. Risk of burns from the soldering tool while the
control unit is operating.
Carefully read the attached safety information, the safety information accompa-
nying these operating instructions as well as the operating instructions for your
control unit before putting the control unit into operation and observe the safety
precautions specied therein.
Always place the soldering tool in the safety rest while not in use.
The device has been manufactured in accordance with state-of-the-art technology and acknowledged regula-
tions concerning safety. There is nevertheless the risk of personal injury and damage to property if you fail to
observe the safety information set out in the accompanying booklet and the warnings given in these instruc-
tions. Always pass on the device to third parties together with these operating instructions.
Specied Conditions Of Use
Use the soldering station only for the purpose of soldering, as specied in the Operating Instructions.
Intended use of the soldering station/ desoldering station also includes the requirement that you
adhere to these instructions,
observe all other accompanying documents,
comply with national accident prevention guidelines applicable at the place of use.
The manufacturer will not be liable for unauthorised modications to the device.
Applied directives
This device conforms to the specications of the EC Declaration of Conformity with Directives 2004/108/
EC, 2006/95/EC and 2011/65/EU (RoHS).
Disposal
Do not dispose of electric tools together with household waste material! In observance
of European Directive 2012/19/EU on waste electrical and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end
of their life must be collected separately and returned to an environmentally compatible
recycling facility.
For your safety
Technical Data
Soldering station WSD 81i
Dimensions L x W x H
166 x 115 x 101 mm
(6.54 x 4.53 x 3.98 inch)
Mains supply voltage 230 V ~ 50/60 Hz | 240/120 V ~ 50/60 Hz
120 V ~ 60 Hz | 100V ~ 50/60 Hz
Power consumption 95 W
Safety class I, antistatic housing
III, Soldering tool
Fuse T500 mA (230 V / 50/60 Hz)
T1,0 A (120V / 60 Hz)
T1,25 A (100 V / 50/60 Hz)
Temperature range 50 - 450 °C
150 - 850 °F
Temperature accuracy ± 2%
Equipotential bonding Via 3.5 mm pawl socket on back of unit
(delivery form: hard grounded without jack plug)
Equipotential bonding
a
b
c
d
Four variants are possible by connecting the 3.5 mm jack socket
differently:
a Hard-grounded supplied without plug.
b Equipotential
bonding
with plug, equaliser at centre contact.
c Floating with plug
d Soft-grounded with plug and soldered resistor. Ground-
ed through selected resistor.
Warranty
Claims by the buyer for physical defects are time-barred after a period of one year from delivery to the
buyer. This does not apply to claims by the buyer for indemnication in accordance with §§ 478, 479
BGB (German Federal Law Gazette).
We shall only be liable for claims arising from a warranty furnished by us if the quality or durability warranty
has been furnished by use in writing and using the term „Warranty“.
The warranty shall be void if damage is due to improper use and if the device has been tampered with by
unauthorised persons.
Subject to technical alterations and amendments.
Operating instructions are available for download at www.weller-tools.com.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weller WSD 81i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weller WSD 81i in the language / languages: All languages as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info