99768
19
Zoom out
Zoom in
Previous page
1/57
Next page
18
GB
1. Description
1. Electronic temperature adjustment, continuously variable from 150°C - 450°C or
with encoder models, fixed temperatures are obtained using encoder plugs.
2. Antistatic soldering iron LR-21 (24V/50W).
3. High performance heating element. (Insulation) 500V.
4. Selection of 22 WELLER "Longlife" Soldering tips.
5. Temperature resistant silicon cord.
6. Visible regulation control.
7. Socket for potential equalisation.
8. Potentiometer locking
9. Mains switch
10. Mains fuse T 0.315A (5x20)
11. 5-channel plug, interlocking
12. Safety support rack, can be free-standing or connected either to the left or right
side of the control unit
13. Cleaning sponge
14. Holder for additional tips.
The soldering Station WECP-20 is best suited for soldering electrically or thermally
sensitive electronic components. A large variety of soldering tools can be connected
via the 6-channel connection socket. The available soldering tools are given in the
accessories list. All soldering tools are electrically isolated from mains and operate
with a protective low voltage of 24V AC.
Analogue temperature regulation is carried out using a potentiometer which can be
used to set the temperature continuously in a range of 50°C to 450°C. A green LED
indicates the status of the regulation.
The mains fuse is easy to change. The fuse can be removed by lightly pushing in the
fuse holder and turning it to the left. Potential equalisation of the soldering tip can be
achieved using the corresponding connection socket on the front side of the unit.
Through the antistatic design of the control unit and irons, the Soldering Station WECP-
20 antistatic fulfils all requirements of the EGB safety regulations.
The soldering station WECP-20 is also available in encoder versions and can be converted
to a COD (encoder) version with a conversion kit.
The soldering iron LR 21* comes standard with a temperature resistant silicon cord
and a "WELLER Longlife" soldering tip type ET-B. The lifetime of the "WELLER Longlife"
soldering tip is lengthened substantially by the electro-plated finish on the copper core.
There are 22 different soldering tip forms to choose from. You can choose the optimal
tip from one of these.
* Information contained in the Operation Manuals of any other connected WELLER
tools should be observed in addition to the information contained in this Operation
Manual.
Technical Data
Dimensions (WxDxH): 115 x 150 x 94
Mains voltage: 230V (240V, 120V), 50 (60) Hz
Heating voltage: 24V, 50 (60) Hz
Soldering iron power: max. 50W at 24V
Mains fuse: T 0.315A
Accuracy: Regulation tolerance ± 2% of final value
Weight: 2.1 kg
Picture: Soldering tip choices, see page 46+47
2. Commissioning
Fasten the holder spring with funnel to the foot plate of the soldering iron holder (see
exploded view) and soak the cleaning sponge with water (13). Place the soldering iron
into the safety support rack (12). Insert the soldering iron plug (11) into the 6-channel
connection socket of the control unit and lock it. Connect the control unit to mains. Be
sure to check for the correct voltage.
Set the desired temperature using the potentiometer (1) and switch on the unit at the
mains switch (9). With COD versions, use the corresponding coded plug to set the
temperature.
The green LED illuminates (6). This LED indicates the status of the regulation.
"Continuous illumination" indicates that the actual temperature lies below the set
temperature. The system is heating.
"Blinking" indicates that the actual temperature corresponds to the set temperature.
WECP20.pm65 11.03.2002, 11:19 Uhr18
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weller WECP-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weller WECP-20 in the language / languages: Dutch, All languages as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info