Manual Weldkar MIG 2125 INVERTER WELDER (page 12 of 44) (English, German, Dutch, French)

686265

Zoom out

Zoom in

1/44

INVERTER WELDER WK MIG 2125

WARNING

PROTECT YOURSELF AND OTHERS FROM POSSIBLE SERIOUS INJURY OR DEATH. KEEP CHILDREN

AWAY. PACEMAKER WEARERS KEEP AWAY UNTIL CONSULTING YOUR DOCTOR. DO NOT LOSE

THESE INSTRUCTIONS. READ OPERATING/INSTRUCTION MANUAL BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

Welding products and welding processes can cause serious injury or death, or damage to other equipment or property, if

the operator does not strictly observe all safety rules and take precautionary actions.

Safe practices have developed from past experience in the use of welding and cutting. These practices must be learned

through study and training before using this equipment. Some of these practices apply to equipment connected to power

lines; other practices apply to engine driven equipment. Anyone not having extensive training in welding and cutting

practices should not attempt to weld.

Safe practices are outlined in the European Standard EN60974-1 entitled: Safety in welding and allied processes - Part 2:

Electrical. This publication and other guides to what you should learn before operating this equipment are listed at the end

of these safety precautions.

HAVE ALL INSTALLATION, OPERATION, MAINTENANCE, AND REPAIR WORK PERFORMED

ONLY BY QUALIFIED PEOPLE.

While the information contained in this Manual represents the Manufacturer’s best judgement, the Manufacturer assumes

no liability for its use.

Reproduction of this work, in whole or in part, without written permission of the publisher is prohibited.

The publisher does not assume and hereby disclaims any liability to any party for any loss or damage caused by any error

or omission in this Manual, whether such error results from negligence, accident, or any other cause.

Weldkar Welding Equipment

www.weldkar.com

TABLE OF CONTENTS - ENGLISH

1 Safety Instructions and Warnings 13

1.1 Arc Welding Hazards 13

1.2 Symbol Chart 15

2 Introduction 16

2.1 General description 16

2.2 Technical speciﬁcations 16

2.3 Explanation of the technical speciﬁcations listed on the machine plate 16

2.4 Thermal protection 16

2.5 Motor-driven generators 16

3 Installation 17

3.1 Description of the equipment 17

3.2 Reel ﬁtting sequence 17

3.3 Wire feed 17

3.4 Gas connection 17

3.5 Welding mild steel 18

3.5.1 MIG Welding with gas protection 18

3.5.2 MIG Welding without gas protection 18

3.5.3 MIG Welding aluminium 18

3.5.4 MIG welding stainless steel 18

4 Maintenance 19

4.1 Maintenance of the welding inverter 19

4.2 Precautions after repairs 19

4.3 Troubleshooting & Service 19

A Electrical principle drawing 41

B Spare Parts list 42

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Weldkar MIG 2125 INVERTER WELDER in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Weldkar MIG 2125 INVERTER WELDER Manual

Product: