704210
23
Zoom out
Zoom in
Previous page
1/40
Next page
Transducer accuracy test
Required tools, equipment, and accessories
To complete the transducer accuracy test, the following tools and accessories are
required:
scissors or other cutting device
one 4-way hose barb tee for 1/8 inch ID tubing
a minimum of 32 inches of 1/4 inch (.25) OD and 1/8 inch (.125) ID silicone rubber
tubing
approximately 14 inches from the hand bulb to the 4-way tee
approximately 12 inches from the test volume repair fixture to the 4-way tee
approximately 6 inches from pressure meter simulator to the 4-way tee
For the transducer accuracy test, the following equipment is required: (1) the test
volume repair fixture with test manifold, bulb, and valve; (2) a pressure meter simulator;
(3) the device with the Flexiport
®
connector removed. For further information or to order
the test equipment, contact Welch Allyn Technical Support at: http://
www.welchallyn.com/support.
No. Item
1 Test volume repair fixture
(Welch Allyn BP Test Volume Repair Fixture 407672 or equivalent
with test manifold, bulb and valve, 4-way hose barb tee, and 1/4
inch [.25] OD silicone rubber tubing)
Note
For the transducer accuracy test, connect the
test equipment shown below. Connect the
manifold to the test volume repair fixture. The
calibrated volume is 500 ml.
2 Pressure meter simulator (with an accuracy of ± 3 mmHg)
3 Device
(ProBP™ 2000 Digital BP Device)
1. Use scissors or other cutting device to cut off the Flexiport
®
hose fitting from the
end of the device tubing.
Directions for use Specifications 19
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Welch Allyn ProBP 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Welch Allyn ProBP 2000 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Welch Allyn ProBP 2000

Welch Allyn ProBP 2000 User Manual - German - 40 pages

Welch Allyn ProBP 2000 User Manual - Dutch - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info