643298
36
Zoom out
Zoom in
Previous page
1/84
Next page
Installation and operating instruction
Oil burner WL20/1-C Z
7 Commissioning
83307602 1/2019-04 La 36-84
Set pump pressure for stage2
Heat demand required for stage 2 (contact T6/T8 closed).
Plug in 4 pole connection plug.
Burner drives to stage2.
The pump pressure must be set according to the nozzle selected [ch.4.2].
Check pump pressure at pressure gauge.
Set pressure using pressure regulating screw1:
increase pressure: clockwise rotation,
decrease pressure: anticlockwise rotation.
1
2. Adjust stage 2
Exit this stage, if the air damper setting has to be adjusted. The air damper setting
for stage 2must be adjusted in stage 1.
Check combustion values
Determine combustion limit [ch.7.4].
Set excess air using air damper setting limit switch ST2 and diffuser setting
whilst observing the mixing pressure determined [ch.7.1.2].
3. Adjust stage 1
Exit this stage, if the air damper setting has to be adjusted. The air damper setting
for stage 1must be adjusted in stage 2.
Unplug 4 pole connection plug.
Burner drives to stage1.
Check combustion values
Determine combustion limit [ch.7.4].
Set excess air using air damper setting limit switch ST1 whilst observing the mix-
ing pressure determined [ch.7.1.2].
If the diffuser setting is adjusted, stage2 excess air has to be re-adjusted.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weishaupt WL20-1-C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weishaupt WL20-1-C in the language / languages: English as an attachment in your email.

The manual is 2.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Weishaupt WL20-1-C

Weishaupt WL20-1-C User Manual - German - 40 pages

Weishaupt WL20-1-C Installation Guide - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info