656558
25
Zoom out
Zoom in
Previous page
1/27
Next page
25
level or get the current value from the Internet. You can adjust the weather station
like this:
Press and hold the HISTORY ABS / REL button for approx. 3 seconds. After that
press the + or -button to interchange between the absolute or relative air
pressure.
Chose „Rel“ and press the HISTORY ABS/REL button for confirmation. The air
pressure indication blinks. Now you can chose the correct value by pressing the +
or -button.
Confirm your choice by pressing the HISTORY ABS / REL button. Your weather
station now shows the relative air pressure.
Press and hold the HISTORY ABS / REL button for approx. 3 seconds. Afterwards
press the + or -button, to change to the absolute air pressure. Confirm by
pressing the HISTORY ABS / REL button.
Setting the channel
The weather station receives the outdoor sensor signal automatically after you have
made all the settings. The symbol for humidity (outdoor) and outdoor temperature
flashes during this time.
- 1: Outdoor sensor channel 1
- 2: Outdoor sensor channel 2
- 3: Outdoor sensor channel 3
- : automatic channel change
Displaying the maximum / minimum temperature /
humidity
The minimum / maximum temperature / humidity is measured for the first time
after the batteries have been inserted and stored in the weather station.
The maximum and minimum values for temperature, hygrometer and barometric
pressure are automatically saved.
If the weather station is in time display , press the + button to display the
maximum values.
Press the + button twice to display the minimum values.
Hold the + button down for approx. 3 seconds to erase the stored maximum
and minimum values.
Temperature and frost alarm
The temperature alarm is a short beep, which sounds as soon as the outdoor
temperature exceeds or falls below the preset temperature range. Follow the below
procedures to set the desired temperature range.
Press the button to get top the temperature alarm mode.
Hold the button down for 3 seconds. The maximum temperature display blinks.
Press the + or button to set the values.
Press the MODE button to confirm your setting. The minimum temperature display
blinks. Press the + or button to set the values.
Press the MODE button to confirm your setting.
Activating / deactivating the the temperature and frost
alarm
If more than one outdoor sensor is activated, press the channel button to select
one.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weinberger 40283 - 7312 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weinberger 40283 - 7312 in the language / languages: English, German as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info