50963
37
Zoom out
Zoom in
Previous page
1/53
Next page
5 Command overload safeguard:
Controls overloading with the 4
th
set- Set 1 -- command -- setpoint -- 25000 -- executive code b (= at
point monitoring the gross weight setpoint nr. 4 only : always compare with gross weight value, after
achieved weight set on hold, active at once) -- setpoint nr. 4 (H)
5 Command stop setpoints:
Switching off one or more setpoints is done with the same Run
command, but inverse:
setpoints that are not
switched on, are switched off
Set 1 -- command -- start setpoint (Run) -- code N (= stop
setpoint nr. 1, continue or start setpoints nr. 2, 3, 4)
Set 1 -- command -- start setpoint (Run) -- code @ (= stop
setpoint nr. 1, continue or start setpoints nr. 2, 3, 4
Run code’s: see table 8 on page 46.
10. 5 USE OF THE SETPOINT TABLES
Operation of setpoints makes use of the next tables:
Table 3 (page 41) The decimal point is not used in the setpoint weight strings. The
Position of the decimal point position of the decimal may be derived from table 3.
Table 6 (page 44) A letter code is chosen in order to control all possible combinations
Setpoint numbers of setpoint (16) in one digit only.
Table 7 (page 45) All the setpoint functions: set net, set gross, hold, hold + step next
Executive codes of the setpoints and yes / no direct active may be selected here in all the possible
combinations.
Above this is selectable: set zero instead of tare before setpoint
start, delay of auto step to next setpoint, select setpoint nr. 4 as
safeguard overload control on the gross weight value.
Table 8 (page 46) The selected sign determines which (combination of) setpoints
Run (start) codes for the setpoints will be started or stopped.
The special filter modes for the setpoint comparator are selected
here too.
Manual 348-2 V 3.1 Page 37 01-06-2007
A ! S 0 2 5 0 0 0 b H CR
A ! R N CR
A ! R @ CR
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weightec 348 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weightec 348 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Weightec 348

Weightec 348 User Manual - Dutch - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info