Manual Weightec 348 (page 18 of 53) (English)

50963

Zoom out

Zoom in

1/53

4.8 ADJUSTING : SCALE DIVISION, DECIMAL SWITCH 53 - 56

SEE TABLE 3

System : The weight value of each count from the A/D conversion is determined by the

setting of switch 53 up to 56.

At the same time the place of the decimal point is established.

Selectable are values from x 0.001 up to x 50, see table 3 on page 41.

Example : With a span setting (see 4.4) of only switch 17 “on” = 7,500 counts, and a

scale division setting with only switch 55 “on” (= x 0.005), the weight reading

will be at full load: 7,500 counts x 0.005 = 0 - 37.500 with steps per 0.005.

On the internal display these value can be read in full extend, the decimal point

and an extra decade (reading x 10) to the right included. In de datastring

the decimal point is neglected, but can be determined in digit 14 of the string.

4.9 ADJUSTING : COMPORT SETTINGS SWITCH 57 - 67

SEE TABLE 4

CL / V24 : Current Loop or RS 232 transmission mode is determined by the way the

transmission cable is connected to the data output connector and by setting of

switch 65 and 66.

See “Lay out and connections” on page 24.

Current Loop is opto coupled, 20 mA , short cut proof and fully floating.

V24 receipt is passive, buffered up to 85 V. V24 sending is active en buffered.

Baud rate : Settings are 1200, 2400, 9600 en 19200 Bd with switch 57 and 58, see table

4 on page 42

Slow down transmission speed : The speed of transmission at continuous mode may be delayed to max

1,1 string per second, by sending the command : ! E A CR, see page 38, 42.

Character frame : 1 start bit, 7 data bits, 1 parity bit (odd/even selectable with switch 59),

2 stop bits,

Asynchron ASCII with always CR as last character, see table 4 on page 42.

Device (call) number : Setting with switch 61 up to 64 from nr. 0 up to 16. The 348 responds only on

requests and commands with its call number in front. See table 5 on page 43.

Selected as device nr. 0, the 348 will send continuously.

In the answer messages the call number is always sent back, in the first digit

of the string.

Manual 348-2 V 3.1 Page 18 01-06-2007

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Weightec 348 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Weightec 348

Weightec 348 User Manual - Dutch - 49 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Weightec 348 Manual

Product: