669937
8
Zoom out
Zoom in
Previous page
1/20
Next page
8
6. Grease an M10 x 165mm Bolt (50). Attach the
Backrest Frames (16) to the Frame (1) with the
Bolt, two M10 Washers (55), and an M10
L
ocknut (42). Set the end of the Backrest Post
(15) in one of the slots in the Frame. Do not
o
vertighten the Locknut; the Backrest
Frames must pivot easily.
See step 5. Tighten the M10 Locknut (42) and
the four M6 x 40mm Screws (51). Do not over-
tighten the Locknut; the Backrest Post (15)
must pivot easily.
7. Attach the Weight Tube (24) to the Leg Lever
(5) with an M8 x 70mm Bolt (46), a Weight
Tube Spacer (41), two M8 Washers (49), and
an M8 Locknut (36). Then, press a 25mm
Round Outer Cap (29) onto the Weight Tube.
Grease the barrel of an M10 x 77mm Bolt Set
(47). Attach the Leg Lever (5) to the Front Leg
(4) with the Bolt Set. Make sure that the barrel
of the Bolt Set is inserted through both
sides of the bracket on the Front Leg.
6
7
16
1
42
15
Slot
55
50
55
4
47
47
Grease
Bracket
5
36
49
49
29
41
46
24
Grease
8. Insert the Long Pad Tube (56) into the bracket
on the Front Leg (4). Slide two Foam Pads (22)
onto the Pad Tube, and then press two Pad
Caps (23) into the Foam Pads.
Repeat this step with the two Short Pad
Tubes (21) and the Leg Lever (5).
8
23
23
4
5
22
22
56
21
21
Bracket
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weider Pro 290 - WEEVBE2078 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weider Pro 290 - WEEVBE2078 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info