798848
13
Zoom out
Zoom in
Previous page
1/24
Next page
13
Operation
Igniting the Barbecue
Using the Crossover Ignition System to
Ignite the Barbecue
The crossover ignition system ignites the burner
furthest to the left, burner 1, with a spark from the
igniter electrode. You generate the energy for the spark
by pushing the igniter button. You will hear the igniter
clicking. Burner(s) 2 (and 3) can be lit after burner1 is
lit. All burners should be lit for preheating, however, all
burners do not have to be lit while barbecuing.
1) Open the barbecue lid (A).
2) Check that all burner control knobs are in the o
position. Check by pushing in and turning knobs
clockwise (B).
Note: It is important that all burner control knobs are
in the o position before turning on the LPG cylinder.
3) Turn gas supply on by turning cylinder valve
anti-clockwise or by moving regulator lever to the
onposition depending on your regulator/cylinder
connection.
4) Begin with the burner furthest to the left, burner 1.
Push the burner control knob in and turn it anti-
clockwise to the start/high position (C).
IMPORTANT: Always ignite burner 1 first. The other
burner(s) ignite from burner 1.
5) Push and hold the electronic ignition button (D).
Youwill hear it ticking.
6) Check that burner 1 is lit by looking through the
cooking grates and through the FLAVORIZER bars.
7) If the burner does not ignite, turn the burner control
knob to the o position and wait five minutes to
allow the gas to clear before attempting to light the
burner again.
8) When burner 1 ignites, you can turn on burner 2
(and burner 3).
Should the burners fail to ignite using the electronic
ignition, refer to the TROUBLESHOOTING section.
Thereyou will find instructions on igniting the
barbecue with a match to help determine the exact
problem.
To Extinguish Burners
1) Push each burner control knob in and then turn
clockwise all the way to the o position.
2) Turn the gas supply o at the LPG cylinder.
m WARNING: Open lid during ignition.
m WARNING: Do not lean over open barbecue
while igniting or cooking.
m WARNING: If ignition does not occur within
four seconds of attempting to light the first
burner, turn the burner control knob to
the o position. Wait five minutes to allow
accumulated gas to dissipate, and then repeat
the lighting procedure.
A
B C
D
A
B
C
D
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weber Spirit E-215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weber Spirit E-215 in the language / languages: English as an attachment in your email.

The manual is 13.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Weber Spirit E-215

Weber Spirit E-215 Installation Guide - German - 40 pages

Weber Spirit E-215 User Manual - German - 24 pages

Weber Spirit E-215 Installation Guide - Dutch - 40 pages

Weber Spirit E-215 User Manual - Dutch - 24 pages

Weber Spirit E-215 Installation Guide - French, Italian - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info