Be sure that there is gas flow to the burners by attempting to match-light your burners. Refer to “MAIN BURNER
IGNITION—Lighting with a Match.” If match-lighting is successful, the problem lies in the ignition system. Refer to
“MAINTAINING THE CROSSOVER
™
IGNITION SYSTEM.”
Check that the wires are connected to terminals on igniter under the control panel.
Burners do not ignite.
Burners have a small flickering flame when burner
control knobs are set to the high () position.
Grill temperature only reaches 250° to 300° F when
set to the high () position.
Some countries have regulators with an excess gas flow safety device. The excess flow safety device, which is part
of the grill-to-cylinder connection, may have been activated. To reset the excess flow safety device, close the LPG
cylinder valve and turn all burner control knobs to the off () position. Open the grill lid. Wait at least five minutes for
the gas to clear before attempting to light the grill. SLOWLY turn the LPG cylinder valve until it is completely open.
Waitseveral seconds; then ignite your grill. Refer to “MAIN BURNER IGNITION & USAGE.”
Burner does not ignite, or flame is low when set to
high () position.
LPG fuel could be low or empty. Refill LPG cylinder.
Fuel hose could be bent or kinked. Straighten fuel hose.
Burner flame pattern is erratic.
Flame is low when burner is set to high () position.
Flames do not run the whole length of the
burnertube.
Clean burner ports that run down the entire length of burner tube. Refer to “ANNUAL MAINTENANCE.”
Burners burn with a yellow or orange flame,
combined with the smell of gas.
Inspect spider/insect screens for possible obstructions. (Blockage of holes.) Clean spider/insect screens.
Refer to “ANNUAL MAINTENANCE.”
Experiencing flare-ups.
m CAUTION: Do not line the slide-out
grease tray with aluminium foil.
Grill must be preheated with all burners on high for 10 to 15 minutes.
Clean the cooking grates and Flavorizer
™
bars thoroughly to remove grease. Refer to “ROUTINE MAINTENANCE.”
The slide-out grease tray may be dirty and is not allowing grease to flow into catch pan. Clean slide-out grease tray.
Inside of lid appears to be “peeling.”
(Resembles paint peeling.)
The inside of the lid is porcelain enamel or stainless steel. It is not painted. It cannot “peel.” What you are seeing
is baked-on grease that has turned to carbon and is flaking off. THIS IS NOT A DEFECT. Clean thoroughly. Refer to
“ROUTINE MAINTENANCE.”
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Weber Spirit Classic E-310 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Weber Spirit Classic E-310 in the language / languages: English as an attachment in your email.
The manual is 6,17 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
