Inspect burner for possible obstructions. Clean burner.
(See “Maintenance” section)
Burner does not light, or flame is low.Is LP fuel low or empty?Replace LP cylinder.
Is fuel hose bent or kinked?Straighten fuel hose.
Does the burner light with a match?If you can light the burner with a match, then check
the ignition system.
Is the hose to burner tube connection properly
secured?
Connect the gas hose to the burner tube using the
metal retaining clip provided.
m DANGER: Do not use the gas ignition feature
if the retaining clip is missing. A missing
retaining clip can cause serious bodily injury or
death, and damage to property.
Contact Customer Service for a replacement
retainer clip.
Burner flame pattern is erratic. Is burner clean?Clean burner.
(See “Maintenance” section)
Burner does not ignite when you push the igniter
button.
Be sure that there is gas flow to the burners by
attempting to match light your burners. Refer to
“MANUAL IGNITION.”
If match lighting is successful, the problem lies in
the ignition system. Refer to “ELECTRONIC IGNITION
SYSTEM OPERATION.”
Is there a fresh battery installed?Verify that the battery is in good condition and
installed correctly. Refer to “ELECTRONIC IGNITER
INSPECTION.”
Are the wires connected properly to the ignition
module?
Be sure that wires are correctly inserted into
terminals on ignition box. Refer to “ELECTRONIC
IGNITION SYSTEM OPERATION.”
Is there plastic wrapping around the new battery?Remove plastic wrapping.
Timer does not work.Is there a fresh batteries installed?Verify that the batteries is in good condition and
installed correctly. Refer to “TIMER OPERATION.”
Inside of lid appears to be “peeling.” (Resembles
paint peeling.)
What you are seeing is baked-on grease that has
turned to carbon and is flaking off.
THIS IS NOT A DEFECT.
Clean thoroughly.
(See “Cleaning” section)
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Weber Performer De Luxe GBS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Weber Performer De Luxe GBS in the language / languages: All languages as an attachment in your email.
The manual is 28,38 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
