802118
18
Zoom out
Zoom in
Previous page
1/34
Next page
8 | Webasto Unite Configuration Interface
18 / 34 5111967B_OI-II_Webasto Unite_EN
Local Load Management
System Maintenance - see also: chapter8.8, "System
Maintenance" on page 22
Firmware Update Screen Flow
8.1 Main page
After logging in successfully, you are directed to the main page.
The main page shows general information about the device
such as software versions, connection interface and IDs.
8.2 General Settings
8.2.1 Setting the LED dimmer
To adjust the brightness level of the LED ring, select the desired
option in the drop-down list.
If you select the LED dimming level as “Time Based”, then the
options “Sunrise Time” and “Sunset Time” are shown and can
be configured. “Sunrise Time” defines the transition time of low
to high dimming level. Similarly, “Sunset Time” defines the
transition time of high to low dimming level. Sunrise and sunset
time-based configuration is a periodic daily setting.
8.2.2 Setting the standby LED behavior
To enable standby LED behaviour, select “On” in the drop-down
list. When set to "Off" the LED indicator is not illuminated when
in standby. The default setting is "On".
8.3 Installation Settings
8.3.1 Earthing system
Select the Earthing System tab from the web configuration in-
terface.
If you select earthing type IT, then the protective earth error
check is disabled.
The earthing type is set to TN/TT by default in the web config-
uration interface.
8.3.2 Current limiter settings
Here you can set the number of installed phases and the max-
imum current limit. Please note that incorrect setting of the in-
stalled phases (e.g. setting three phases when actually only one
phase is installed) will cause the charging station to go into fail-
ure mode.
The current limiter value can be manually set between 6 – 32 A.
If a value below 6 A is entered, a warning will be shown to
enter a minimum of 6A.
Example: If the charging station’s current limiter is set to 16A in
the hardware and it is entered and set to 32A in the web con-
figuration interface, then the station will take 16A.
8.3.3 Unbalanced load detection
Unbalanced load detection is disabled in web configuration
user interface by default.
The unbalanced load detection function detects if there is an ex-
cessive difference in power consumption between phases.
If one phase draws more than 4.6 kW of power (average of the
last minute) than the other phases in one minute, the load is un-
balanced. Unbalanced load detection detects this situation and
the current is limited so that the phases do not exceed the
power limit.
For example,
Phase 1 power :3 kW,
Phase 2 power :3 kW,
Phase 3 power: 1 kW.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Webasto Unite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Webasto Unite in the language / languages: English as an attachment in your email.

The manual is 33.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Webasto Unite

Webasto Unite User Manual - German - 38 pages

Webasto Unite User Manual - Dutch - 36 pages

Webasto Unite User Manual - French - 37 pages

Webasto Unite User Manual - Italian - 37 pages

Webasto Unite User Manual - Portuguese - 37 pages

Webasto Unite User Manual - Spanish - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info