802116
28
Zoom out
Zoom in
Previous page
1/79
Next page
EN
16 5110326C_OI-II_Webasto Live
3.1.3 SIM cardslot for modem
If it is necessary to change the GSM provider, then the
SIM card can be removed from the SIM card slot (pull
out, not automatically ejected by a spring) and an altern-
ative SIM card can be inserted. Prerequisites for using a
SIM card:
Form factor 3FF (micro SIM)
Service M2M without PIN, provider enabled
3.1.4 LAN
For connecting the charging station to the network infra-
structure at the installation location. The charging station
can be configured and controlled using this connection
(prerequisite: connection to the back end or to the local
power management system). A category 5e network
cable or higher is recommended.
3.1.5 USB type B
Connecting in slave mode for making a USB connection
to a computer for the configuration. When connected to
a computer, this USB connection functions like a network
interface, and is used to open the web configuration in-
terface.
(see online configuration instructions: https://webasto-
charging.com/documentation).
3.1.6 WLAN
After completing the start process of the charging sta-
tion, you have the option to connect a WLAN-enabled
computer or mobile device to the charging station hot-
spot (see online configuration instructions: https://
webasto-charging.com/documentation)
Only the configuration interface can be opened using the
established connection.
3.1.7 Control cable (Control Pilot)
Fig.3
Legend
Modbus
CP connection (push-in terminal)
There also is a data line in the charging cable together
with the power supply lines and is known as a CP (control
pilot) line. This line (black-white) is inserted into the push-
in terminal on the CP connection . This applies to in-
stalling the original charging cable and also to replacing
the charging cable.
3.2 Description of power supply interface
connections
Fig.4
The connections of the mains cable are marked with
"IN". The 5 terminals on the left have L1/L2/L3/N/PE prin-
ted on them
The connections of the charging cable are marked with
"OUT". The 5 terminals on the right have PE/N/L1/L2/L3
printed on them
NOTE
To release the power supply connections, use an insu-
lated flat-head screwdriver by inserting it into the
opening for this purpose immediately above push-in
terminal.
All dimensions specified in mm.
3.3 Electricity meter
With the integrated MID-compliant power meter, it is
possible to measure power consumption by loading with
the Webasto Live. The calibration date for the power
meter can be found on the type plate on the charging
station, below the CE mark. When using the power
meter, pay careful attention to the country-specific legal
calibration stipulation.
4Scope of delivery
Scope of delivery Amount
Charging station 1
Charging cable with charging coupling 1
RFID dongle 2
Installation kit for wall mounting
Wall plug (8 x 50 mm, Fischer UXR8) 4
Screw (6 x 70, T25) 2
Scope of delivery Amount
Screw (6 x 90, T25) 2
Washer (12 x 6.4 mm, DIN 125-A2) 4
Screw (3 x 20 mm, T10) 2
Mounting bracket 1
Cable bushing, (one is custom-made) 2
Installation kit for charging cable:
Spiral antikink protection 1
Cable tie 1
Strain relief clamp 1
Screw (6.5x25mm, T25) for fastening
the strain relief clamp 2
Operating and installation instructions 1
5Required tools
Tool description Amount
Slot-head screwdriver 0.5x3.5mm 1
Torx screwdriver Tx25 1
Torx screwdriver Tx10 1
Torque wrench (range covers 5-6Nm, for
Tx25)
1
Torque wrench (range covers 4-5Nm, for
open-ended spanner size 29)
1
Drilling machine with 8 mm drill 1
Hammer 1
Measuring tape 1
Spirit level 1
Wire stripping tool 1
Installation tester 1
EV simulator with rotary field display 1
Round file 1
Combination pliers 1
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Webasto Live at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Webasto Live in the language / languages: English, German, Dutch, Italian, Spanish as an attachment in your email.

The manual is 7.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Webasto Live

Webasto Live User Manual - Danish, Swedish, Norwegian, Finnish - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info