802136
7
Zoom out
Zoom in
Previous page
1/168
Next page
Cool Top Trail 35 7
4.3 Different cut-out sizes
The installation is possible for different cut-out sizes:
a) Install instead of a 400x400mm roof hatch:
Dismount the roof hatch and use the remaining cut-
out. Remove sealant residue and unevenness. Fill in
screw holes with flexible non-hardening butyl body
sealant.
The adapter frame for 400x400mm cut-outs is part of
the scope of delivery.
b) Install instead of a 360x360mm roof hatch:
Dismount the roof hatch and use the remaining cut-
out. You need to buy the optional adaptor frame for
such cut-outs. It can be used instead of the
400x400mm adaptor frame.
Remove sealant residue and unevenness. Fill in screw
holes with flexible non-hardening butyl body sealant.
c) Create a new cut-out:
Since the adaptor frame for 400x400mm cut-outs is
part of the standard scope of supply this size may be
used.
If a smaller cut-out is preferred it is possible to buy as
accessory the 360x360mm adaptor frame and use
this one.
Consult the vehicle manufacturer for the most suitable
way and position to create a new cut-out.
4.4 Installation position
998
F
200
150
680
200
150
Fig. 01: Installation direction of the outdoor unit
Before the installation, consider the installation
position:
Make sure that intended location does not interfere
with existing structures and cables.
The air conditioner shall be installed as close as
possible to the centre of the roof.
The installation position of the outdoor unit shall
be consistent with the traveling direction (F) of the
vehicle.
Make sure that there is sucient room on the in-
side of the vehicle to install air distributor.
Consider the installation position of the air distribu-
tor and ensure that outlets of the air distributor are
at least 400mm away from cupboards, walls and
bulkheads that can redirect conditioned air back
to the return air intake. If an outlet is closer than
400mm from an obstruction, then it should be
sealed closed. Failure to do this will result in a unit
that frequently cycles on and off.
The cut-out shall avoid roof cladding joints where
ever possible.
Chose an installation position between two longitu-
dinal supports or sections, if existing.
There shall be a free space of 150mm minimum to
the sides of the unit and 200mm minimum to the
front and the back. the This to ensure suitable air
flow and access for maintenance.
WARNING
When a hatch with safety ventilation func-
tion is replaced by the air conditioner it
must be ensured that the safety ventilation
is restored in another location.
NOTE
Angle of inclination of the air conditioner
shall not be greater than 5° (=8,8%) and
the rear of the air conditioner shall not be
higher than the front.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Webasto Cool Top Trail 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Webasto Cool Top Trail 35 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 15.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info