802134

Webasto Cool Top Trail 28V Manual

15
Zoom out
Zoom in
Previous page
1/154
Next page
Operating Instructions | 5
9044617A_OI-II_Cool Top Trail 28V 15 / 154
5. Press the / button to set the hour when you
want the unit to switch off.
6. Press the HOUR/MIN button, and then press the /
button to set the minutes.
7. To end the setting mode press the SET TIME button again.
The clock time is shown. Alternatively, 10 seconds until the
digits stop flashing.
NOTE
You have now set the timer ON and OFF times, but
these must be activated separately. See chapter5.13,
"Activating the timer" on page 15.
Fig.38 Setting the timer
5.13 Activating the timer
Before activating the timer, select the operation mode, the set
temperature, and the desired fan level.
After the start and stop times are set (see chapter5.12, "Setting
the timer" on page 14) one of the three different TIMER modes
can be activated:
lTIMER ON mode
In this mode the unit will switch on at the desired ON time
and keep on running.
lTIMER OFF mode
In this mode the unit will stop running at the desired OFF
time and will stay off.
lTIMER ON / OFF mode
In this mode the unit will start to run at the ON time and
stop running at the OFF time. This pattern will be repeated
every day.
Fig.39 TIMER Modes
1. Press the TIMER button repeatedly until either the ON or
OFF or both symbols are flashing depending on which timer
mode is preferred.
2. To confirm the selection wait 10 seconds until the symbol
stops flashing and is shown permanently. The clock time is
now displayed again.
Fig.40 Activating the timer
NOTE
If the clock is displayed without an ON / OFF icon, then
you have not activated the timer.
5.14 Setting the sleep function
The sleep function automatically modifies the target temperat-
ure to provide a comfortable sleeping temperature. This also
helps to reduce compressor run time, energy consumption and
noise levels.
1. Press the SLEEP button to activate the sleep function.
– The icon is displayed in the display of the remote con-
trol to indicate that the sleep function is activated.
– In COOL mode the set temperature will automatically in-
crease in two steps and it will have increased by 2°C
after two hours.
– In HEAT mode the set temperature will automatically de-
crease in three steps and it will have decreased by 3°C
after two hours.
– The sleep function is only available in COOL or HEAT
mode.
2. Press the SLEEP button again to deactivate the sleep func-
tion.
Fig.41 Setting the sleep function
5.15 Changing the units of temperature
Press the °C/°F button to select which temperature unit you
want to be displayed: Celsius or Fahrenheit.
lYou can do this in any mode.
lThe display on the air distributor follows the selection made
on the remote control.
Fig.42 Celsius / Fahrenheit selection
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Webasto Cool Top Trail 28V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Webasto Cool Top Trail 28V in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 27.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info