802132
8
Zoom out
Zoom in
Previous page
1/24
Next page
5 | Installation instructions
8 / 24 9039408D_OI-II_Cool Top Trail 20-24_EN
4 Crimp terminals CI-BUS (CI-BUS Unit 2)
5 Housing CI-BUS (CI-BUS Unit 2)
5.8 Adaptor frame installation
1. Make sure the roof is clean, dry and free from oil or grease.
2. Insert the adapter frame into the cut-out to make sure that
the power supply cable and the CI-BUS cable (if applicable)
do not interfere with the frame. If the cables cause obstruc-
tions, then cut or drill openings in the bottom of the frame
to lead the cables through.
3. Confirm the correct orientation of the frame by using the
“This side up” label.
Fig.15 Orientation of the adaptor frame
4. Turn the part over and on the reverse side of “This side up”,
apply silicone sealant uniformly over the path shown.
Fig.16 Sealant paths
5. Turn the part over again and make sure “This side up” is
up. Press down firmly over the installation hole and remove
any sealant that has squeezed out.
Fig.17 Forming an effective seal
5.9 Installing the outdoor unit
Place the outdoor unit over the installed adaptor frame, and ad-
just the position to make sure that the four bolt holes on the
corners are properly aligned.
NOTE
The outdoor unit is heavy. Always have a second per-
son to help carrying the unit.
Do not lift the outdoor unit by the upper white cover.
Lift it by the bottom base.
Using the M8 bolts, verify that the holes of the outdoor unit are
aligned with the holes of the adaptor. If they are not, then re-
position the outdoor unit accordingly.
Do not apply additional sealant between the outdoor unit and
the adaptor frame.
Fig.18 Positioning the outdoor unit
5.10 Connecting the power supply
1. Look upward from inside the vehicle, and locate the ter-
minal block (1).
2. Connect the power supply cable to the 3-pole terminal
block.
3. Match the corresponding active, neutral and the ground
wires.
4. Tighten the screws firmly to make sure that the power lead
is secure and properly connected. Failure to do so may
cause a short circuit or fire.
1
Fig.19 Location of the terminal block
NOTE
Failure to secure the connections properly may result in
a short circuit or a fire.
5.11 Installing the air distributor
mounting-bracket
1. Prepare the M8 bolts (4), washers (3) and fixing metal
clamping bars (2) as illustrated.
2. Lift the air distributor mounting bracket (1) towards the air
conditioner.
3. Insert the M8 bolts, with its washers, and metal clamping
bars into the 4 corner holes of the air distributor’s mount-
ing bracket.
4. Screw the bolts into their receiving threads by hand to en-
sure proper engagement.
5. Make sure that all bolts are screwed in correctly. Minimally
apply 2 rotations to avoid cross threading.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Webasto Cool Top Trail 20-24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Webasto Cool Top Trail 20-24 in the language / languages: English as an attachment in your email.

The manual is 61.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Webasto Cool Top Trail 20-24

Webasto Cool Top Trail 20-24 User Manual - German - 26 pages

Webasto Cool Top Trail 20-24 User Manual - Dutch - 25 pages

Webasto Cool Top Trail 20-24 User Manual - French - 26 pages

Webasto Cool Top Trail 20-24 User Manual - Italian - 26 pages

Webasto Cool Top Trail 20-24 User Manual - Spanish - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info