802129
6
Zoom out
Zoom in
Previous page
1/38
Next page
Cool Top 6
6 Configuration menu
There are several options for the Cool Top. The installer supplies a
working system with the control element configured according
the installed options.
If the system changes or a new control element need to be in-
stalled then the configuration need to be changed.
ATTENTION
If you are unfamiliar with the system then do not
change settings. Only a Webasto service workshop
can use this menu.
Result: Change of settings could lead to system malfunc-
tion.
XContact Webasto in case you have doubts about the
configuration settings.
+ XPress and hold for 3 seconds to enter the config-
uration menu
or XPress to switch between the parameters
XPress to show the current parameter setting
or XPress to change the parameter setting
XPress to save the parameter setting.
Parameter Code Parameter Name
Default Value for Cool Top
Range R/W* Description
RTC 110/140 12V
RTC 110/140 24V
RTC 110/140 12V + FA
RTC 110/140 24V + FA
RTC 190/220 12V
RTC 190/220 24V
RTC 190/220 24V + HEAT
250/300/360 24V
250/300/360 24V + HEAT
Ext External temperature sensor
(NTC3)
--- --- --- --- --- --- --- --- --- --- R Measures the external air tempera-
ture
In1 Internal temperature sensor
(NTC1)
--- --- --- --- --- --- --- --- --- --- R Measures the internal air tempera-
ture
In2 Internal auxiliary temperature
sensor (NTC4)
--- --- --- --- --- --- --- --- --- --- R Measures the Internal air tempera-
ture
Mix Supply air temperature sen-
sor (NTC2)
--- --- --- --- --- --- --- --- --- --- R Measured the supplied air tempera-
ture
Vb Vehicle battery voltage --- --- --- --- --- --- --- --- --- --- R Measures the battery voltage
Vs Sensor supply voltage (5V) --- --- --- --- --- --- --- --- --- --- R Current value measured of the sen-
sors voltage
Rel Release Software --- --- --- --- --- --- --- --- --- --- R Display 102 is version 1.02
Cnf Configuration of the operat-
ing mode
0 0 0 0 0 0 1 0 1 0-1 R/W 0 = A/C (without heating kit)
1 = HVAC (with heating kit)
Act Activation of fresh air 0 0 1 1 1 1 1 1 1 0-1 R/W 0 = Fresh air kit not present
1 = Fresh air kit present
Ntc Activation of internal auxilia-
ry temperature sensor
(NTC4)
0 0 0 0 0 0 1 0 1 0-1 R/W 0 = only internal air sensor present
1 = both internal and auxiliary air
sensors present
Bat Configuration of vehicle bat-
tery
0 1 0 1 0 1 1 1 1 0-1 R/W 0 = 12V / 1 = 24V
Blw Configuration of the blowers
mode
(ONLY for Cool Top RT-CW)
--- --- --- --- 0 0 0 --- --- 0-1 R/W 0 = 3 speeds (S1, S2 and S3)
1 = linear speed for Cool Top RT-
CW (S1, S2, S3, S4, S5 and S6)
Cmp Configuration of the com-
pressor type
--- --- --- --- 0 0 0 1 1 0-1 R/W 0 = Short time delay compressor
(Sanden, Valeo)
1 = Long time delay compressor
(Bock)
Out Exit from menu --- --- --- --- --- --- --- --- --- -- Exit from configuration menu
* R = Read only / W = Write
Tbl. 02: Control element parameters
C
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Webasto Cool Top 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Webasto Cool Top 250 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 16.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info