802211

Webasto BlueCool Connect Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
App navigation | 7
2510264A OI-II BlueCool Connect_draft12 7 / 12
nClick the [+] and [-] icons (6) to set the cabin temperature.
nClick the [+] and [-] icons (4) to adjust the blower settings.
7.4 Settings menu BlueCool AC unit
WMS000075A
Fig.6
The settings menu controls the settings of each A/C unit
Function Description
Info – View the connected A/C unit type
– View the CAN-Bus address of the connec-
ted A/C unit. The CAN-Bus address can be
changed via the BlueCool MyTouch dis-
play or a USB connection to the A/C unit
with the BlueCool Expert Tool. (after the
CAN-Bus address has been changed, re-
start to remove non-used devices from
the start screen)
– View firmware of the connected A/C unit
– View cold water temperature on chiller or
air handlers (optional)
Settings – Change the A/C unit name
– Change operation mode of the unit
– Change temperature unit from display in
°C to °F
Dehumidific-
ation
– Select the number of dehumidification
cycles per 24 h
– Select duration of heating time
– Select duration of cooling time
– See the installation instructions of the A/C
unit for more information.
Error Code Check the latest error code. Error codes are dis-
played if the system is not working properly
7.5 Creating new groups
Creating a group of units enables you to operate and control
the units simultaneously.
nTo create a group, select “Create groups” from the Settings
menu.
nTo remove a group, select the group that you want to re-
move from the Settings menu. See chapter7.2, "Settings
menu BlueCool Connect" on page 6.
1
2
3
Fig.7
Screen contents:
1. The Save button saves the created group with its units.
2. The Group name field enables you to provide an appro-
priate group name.
3. The A/C units fields enable you to add units to the group.
Fig.8
1. Tap the [+] icon on the right of the unit name to add the
unit to the group.
2. When you add a unit to a group, the [+] icon changes from
[+] to [-].
3. Tap the [-] icon on the right of the unit name to remove
any unit added in error from the group.
4. When you have finished, name the group and save it.
After you create the first group, the BCC adds a toggle switch
for groups on the start screen. See chapter7.2, "Settings menu
BlueCool Connect" on page 6 and chapter7.3, "Operating a
unit" on page 6.
Switch from unit view to group view to manage a group. In this
mode you can Start / Stop all grouped units, activate the timer,
and set temperatures and blower speeds.
The BCC does not display actual cabin temperatures because
you cannot view unit settings in group view, to display cabin
temperatures and other unit settings, you must first select unit
view.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Webasto BlueCool Connect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Webasto BlueCool Connect in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info