727751
6
Zoom out
Zoom in
Previous page
1/12
Next page
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Air Purifier WDH-H3 / WDH-H6
Dear Customer,
You have chosen a high-quality product. To ensure that you get a lot of enjoyment from this product, here are a few
more tips:
In case of any problems:
We hope that the unit meets your expectations! If, despite the greatest possible care, there should ever be cause
for complaint, please contact us briefly, as we are very concerned about your satisfaction and would like to clear up
any misunderstanding.
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Equipment and quality features:
Pre-filter: The cleanable pre-filter (filter grid plus filter foam) removes all larger particles such as coarse dust, hair
and lint and ensures a longer service life of the HEPA filter.
Electrostatic filter block (ESP): dust removal down to 0.1 micrometre and microbe-killing effect (bacteria, viruses
and fungi) based on state-of-the-art electrostatic filtration (6 kV) ! The ESP filter block made of stainless steel is
easy to clean and can be used again and again afterwards.
HEPA filter: One of the best filters around, this branded filter captures and filters particles as small as 0.0003mm.
This includes pollen, germs, mould spores and dust with a purity rate of 99.97% !!!
Active carbon filter: Absorbs and cleans many types of smoke and odours (e.g. cigarette smoke) and also helps
break down toxic fumes, gases and solvents.
Anion exchanger: Produces approx. 6-8 million anions/ions per second, which pro-actively combat smoke and
other dirt particles in the room.
Air sensor operation (automatic mode): Automatically measures the air quality. If the detected air quality is very
good, the air purifier automatically switches to a very low operating level (Low). If the result is the opposite and the
air quality is inferior or poor, the operating strength adjusts automatically (Medium, High or Turbo).
Auto timer: With the timer, you can set/select a remaining running time of the appliance of up to 12 hours.
Touch panel: With this modern control panel, you can make your settings quickly and precisely.
3 speed levels: Strong, Medium and Weak
Night mode: Dimmed mode and very quiet operation.
LCD display: The air purifier has a modern and very clear LCD display, so you always have a quick overview of all
settings. Furthermore, the current air quality and, if necessary, a filter change is signalled.
Metal housing: Very robust and with a high-quality and attractive design.
Child lock: Suitable to prevent unintentional adjustment of the settings.
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Important safety instructions:
Operate the unit only in a straight position and with a straight/level stand !
Make sure that there is a minimum distance of 50 cm to the sides and a minimum distance of 10 cm to the rear
of fixtures and walls!
Do not place any objects on the appliance and make sure that the air intake and the exhaust air are always
free!
The appliance does not replace room ventilation and is not suitable for use as an extractor bonnet when
cooking.
Supervise the air purifier when children or animals are near the unit !
This air purifier should only be operated by persons who have the necessary physical and mental capabilities
to operate this device without problems !
Watch out for electricity, never walk into or insert objects into the appliance !
Only qualified personnel or electricians are allowed to open the inside of the unit !
Protect the unit from all moisture and wetness !
Only use the recommended voltage for operating the unit !
Make sure that the power cable is unfolded (untied) before connecting it to the socket !
Make sure that the plug is cleanly and properly connected to the socket before using the appliance !
Do not expose the filters to insect spray, they could later release the insect spray unintentionally !
Switch off the appliance and unplug the mains plug if you want to clean the appliance !
Only clean the appliance with mild cleaning agents !
Avoid using the unit at high room temperatures or in humid conditions !
Do not make any independent modifications to the unit or the cables !
Never reach near the plug or socket with wet hands !
Make sure that highly flammable substances (e.g. gases/oils etc.) are never in the vicinity of the unit !
If you are not going to use the unit for a long time, switch it off and disconnect the mains plug !
Please switch off the unit immediately and disconnect it from the mains/power supply if anything seems
to be wrong !!! In this case, please contact a specialist and do not attempt to repair the unit yourself !!!
Examples: Fuse has blown or the appliance is making unusual noises and/or it smells burnt.
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Device description:
Carrying
handle
Exhaust air
Control and display panel
Power cable
connection
Filter compartment
door
Air intake
Control and display panel
Exhaust air
Carrying handle
Air intake
Pre-filter
Electrostatic filter
block (ESP)
HEPA and active
carbon combi-filter
Air sensor probe
Fan roller(s)
Feet
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Instructions for use:
1.) Overview control panel:
2.) Overview Display / Settings:
Air sensor
operation
On / Off button
ESP filter activation
Night mode
Ion function
Air circulation (1/2/3)
Child lock
Timer
Display of the air quality (Air Quality)
There are three (3) different measurement results:
Cloud smiles= air quality is good> unit operates at low fan strength
Cloud is neutral= air quality is polluted> unit operates at medium fan speed
Cloud is sad= air quality is poor> unit operates at high fan speed
Electrostatic filter block (ESP):
The ESP filter can be activated (deactivated) by pressing the symbol . The ring then
rotates clockwise and signals the active operation of the ESP filter.
Night operation
Night mode can be activated (deactivated) by pressing the symbol The moon starts
flashing and the rest of the display panel is dimmed. The air purifier now operates in
minimum mode, i.e. very low-noise operation (low air circulation).
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Note: The following key can be used to activate the child lock of the appliance. Activation of the child lock is
indicated by the symbol (lock) in the timer field. To cancel the child lock, keep the button pressed for 3 seconds or
disconnect the appliance from the power supply for a short time.
3.) Preparation and installation of the filters
The air purifier is equipped with all filters from the factory. First open the front filter compartment door. Now remove
all the filters. Remove the protective cover from the fine filters and then push the filters back into their drawers in
the correct order. When inserting the filters, make sure that they are inserted the right way round. For the combi-
filter (HEPA + activated charcoal filter) we recommend that the white HEPA side faces to the right so that the air
flows through the HEPA filter first and only then through the activated charcoal filter. Finally, close the front filter
compartment door again properly, otherwise the air purifier cannot be operated.
See the charts below:
Anion exchanger / ion operation
Ion operation can be activated (deactivated) by pressing the symbol .
There are three (3) different fan strengths, press the following button for this:
Level 1 > Weak fan strength
Level 2 > Average fan strength
Level 3 > High fan power
When the symbol lights up, automatic air sensor operation has been activated
Time switch (timer)
You can select thefollowing (remaining) running times of the air purifier by repeatedly
pressing the timer button:
1 h / 2 h / 4 h / 8 h / 12 h
After this time has elapsed, the air purifier switches off automatically. If the setting 00h has
been selected, the unit runs in endless mode.
Display of the fan speed
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
The filters (diagram):
To achieve optimal filter results, we recommend the following filter sequence:
1. Prefilter
2. Electrostatic filter block (ESP)
3. HEPA filter (combined with the active carbon filter).
4. Active carbon filter (combined with the HEPA filter).
4.) The right location
Place the air purifier under the following aspects:
Central to achieving the highest possible effectiveness.
Near possible sources of dirt (windows, doors, pets, smokers).
With a minimum distance to the side of 50 cm and to the rear of 10 cm.
With a distance of approx. 100 cm to TVs, radios and similar devices.
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
5.) Power connection
First connect the supplied power cable properly to the air purifier, then insert the plug into the socket and wait for
the unit to emit a short acknowledgement tone.
6.) Notes on the control panel (touch panel)
The control panel (touch panel) responds best to very short touches of the individual buttons. Longer touches and
firm presses will cause the air purifier not to respond !
7.) Air sensor operation (automatic mode)
In addition to the air purifier settings as explained previously in point 2, the air purifier also has an automatic air
sensor mode (automatic mode). Press the button to activate (deactivate) and the symbol appears in the fan
strength display field.
Please note that the proper air sensor function is only available after approx. one minute !
If the determined air quality is "good", the air purifier automatically switches to a weak fan speed. If the result is the
opposite and the air quality is inferior or poor, the air purifier switches to a stronger fan speed (medium or strong).
Operating instructions for automatic air sensor operation:
The air sensor is located on the side of the unit and reacts to particles in the air and thus always gives only a
tendency of the air quality. Since it is a tendency (similar to a weather station), this function cannot provide a 100%
reliable statement about pollutants in the room air or about the entire area of a room.
Furthermore, stronger operating fluctuations may occur from time to time (jump from good to bad and vice versa),
as the air sensor probe reacts to different particles in the room and is also exposed to draughts.
Cleaning the air sensor
We recommend cleaning the air sensor area approx. every 4-6 months to ensure trouble-free operation of the air
sensor (automatic mode). To do this, take a small soft (damp) cotton rod or something similar (e.g. pipe cleaner)
and carefully pass it through the air slots of the air sensor area (see the following diagrams). Afterwards, we
recommend blowing again vigorously into the air slots of the air sensor area.
Air slots of the air
sensor area
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
8.) Filter change / filter change indicator
The unit is equipped with a filter change indicator. Depending on the duration of use and the degree of soiling, this
may be signalled to you by the indicator panel flashing ! This is the time when the pre-filter should be cleaned
and/or the fine filters replaced.
Notes:
Under normal conditions, the fine filters last for approx. 4,300 operating hours or up to 18 months with an
operation of approx. 8 hours per day ! In more polluted rooms, e.g. smokers' households, the filters may have
to be replaced after approx. 6 months (at the latest when the HEPA filter is dark brown, it should be replaced) !
Disconnect the mains plug before cleaning/replacing the filters. For best filtration results, we strongly
recommend that you use only original filters from the manufacturer.
Never wash the fine filters. (Only the pre-filter and the ESP filter can be cleaned).
To change the filter, follow the instructions and diagrams as described earlier in the operating instructions under
point 3.).
After the pre-filter has been cleaned and/or the fine filters have been replaced, it is necessary to reset the filter
change indicator. To do this, switch the air purifier on again and now press the On/Off button permanentlyfor
approx. 3 seconds! The successful reset is signalled by a short acknowledgement tone. In addition, the flashing of
the display field will stop again.
Cleaning the ESP filter block:
The ESP filter block made of stainless steel can be cleaned as follows.
Carefully pull the ESP filter block out of the drawer like a honeycomb (touch
the top and bottom).
First remove the coarse dust and dirt with a hoover.
Then brush the fins of the ESP filter block with a soft brush.
Again, remove any loose dust and dirt with a hoover. Also remove any dust
residue from the drawer itself.
Now rinse the ESP filter block in a sink with the help of washing-up liquid and
a soft brush (see illustration opposite).
Allow the ESP filter block to dry completely.
Finally, push the ESP filter block back into its drawer and close the filter
compartment door properly.
9.) Cleaning & Storage
Please always disconnect the mains plug first and allow the air purifier to drain completely before carrying out any
cleaning activities on your unit !
9.1 Cleaning:
Use a soft and damp cloth to clean the outside of the unit.
Only use mild cleaning agents to clean your air purifier.
Please ensure that water does not get into the interior of the unit or the electrical display panel (display) at any
time !
9.2 Storage:
We recommend covering the unit for storage or ideally packing it in its original box.
Store the unit in a dry and sufficiently ventilated place/space.
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Technical data:
Model designation: WDH-H3 WDH-H6
Voltage: 220V ~ 50Hz 220V ~ 50Hz
Max. Power consumption: 25 W 45 W
Max. Air circulation: 150 cbm/h 250 cbm/h
Recommended max. room size: 30 sqm (75 cbm) 40 sqm (100 cbm)
Protection class: IP20 IP20
Dimension (H/W/D): 345 x 352 x 204 mm 600 x 352 x 204 mm
Weight: 9.1 kg 13.5 kg
For the technical data, deviations are reserved !!!
Troubleshooting:
The unit itself emits an unpleasant odour:
A new air purifier still has a slight odour of its own (fresh plastic, new motor, new paint, etc.). This new smell
dissipates within a very short time (1-2 weeks) !
The air sensor is causing problems:
Please read the notes under point 7 (Air Sensor Operation / Auto Mode). If the explanations given there are not
applicable and the air sensor continues to cause difficulties (despite cleaning), read the following notes:
1. Check if the unit is in night mode. If so, deactivate the night mode.
2. Have you ever given the air purifier a "free hand" in "auto mode" for 12 hours or have you let it run continuously
? Especially at the beginning and especially with smokers, 12 hours of continuous operation and more are
quite normal, because particles/odour patterns often sit in the entire inventory (curtains, upholstery, carpet,
etc.) and depending on the nature of the material, it can take a considerable amount of time until these have
been released again.
3. Please ensure that the air sensor function is not used when the air purifier is in a draught (e.g. between two
open windows and/or doors).
4. In very rare cases, the air sensor may react negatively to certain substances (e.g. furniture polish, perfume,
etc.) in your room. In these cases, you should refrain from using the automatic air sensor operation (Auto
Mode).
It takes too long to neutralise smoke and/or odours:
In general, the air purifier is very well suited for odour and smoke neutralisation. However, please note that the
result/end result of our air purifier always depends on how much odour particles are flowing in and how the air
circulation is at your location!
This is because the inserted odour filters always absorb/remove only a part of all odour particles in one pass.
Therefore, a general rule is three filter passes until all odour particles have been absorbed.
(Note: When filtering dust and particles, one filter pass is sufficient to clean the air, as all particles are retained in
the fine filter or by the ESP filter = 99% effectiveness. For odours, the active carbon filter is mainly used and here
the filter medium needs approx. three filter cycles per cbm of air until one can speak of clean air = 33%
effectiveness!)
Furthermore, it is important to consider that odour patterns may already be present in the furnishings - and
depending on the nature of the individual materials, it may take a considerable amount of time for them to release
the odours.
(The air purifier only eliminates odours that are circulated or filtered through it).
The unit does not respond / The unit cannot be switched on:
1. Check the power cable. In particular, check the connection to the air purifier, because sometimes the power
cable connection to the air purifier comes loose easily, which is why the air purifier is no longer supplied with
power.
2. Check that all filters are properly inserted and that the front filter compartment door is properly closed.
3. Only touch the buttons on the control panel (touch panel) briefly. Prolonged touching and firm pressing will
cause the air purifier not to respond !
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
The filter change indicator lights up or the control panel flashes, although the filters have been changed recently:
This can happen if the air purifier has not received enough supply air for a short time for some reason or if there
has been a power failure.
1. Open the filter compartment door and check the filters or that they are properly seated.
2. Make sure that the air purifier has enough free space in the area of the air intake.
3. If everything is OK and the filters are not dirty, reset the unit by pressing the On/Off button continuously for
approx. 3 seconds until you hear an acknowledgement tone. (The unit must be switched on during the reset!).
Other:
Warranty statement:
Notwithstanding the statutory warranty claims, the manufacturer grants a warranty in accordance with the laws of
your country, but at least 1 year (in Germany 2 years for private individuals). The warranty begins on the date of
sale of the appliance to the end user.
The guarantee only covers defects that are due to material or manufacturing faults.
Warranty repairs may only be carried out by an authorised customer service. To make a warranty claim, please
enclose the original sales receipt (with date of sale).
Excluded from the guarantee are:
- Normal wear
- Improper applications, such as overloading the appliance or non-approved accessories.
- Damage due to external influences, use of force or foreign objects
- Damage caused by non-observance of the operating instructions, e.g. connection to an incorrect mains voltage
or non-observance of the assembly instructions.
- Completely or partially dismantled units
Conformity:
The air purifier has been tested and itself and/or parts thereof have been manufactured under the following (safety)
standards:
Of course with CE conformity.
CE (LVD) Conformity tested according to: EN 60335-2-65:2003+A1:2008+A11:2012
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019
EN 62233:2008
CE (EMC) conformity tested according to: EN 55014-1:2017
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Correct disposal of this product:
Within the EU, this symbol indicates that this product should not be disposed of with household waste.
Waste equipment contains valuable recyclable materials that should be recycled. Furthermore, the
environment or human health should not be polluted by uncontrolled waste disposal. Therefore,
please dispose of old appliances via suitable collection systems or send the appliance for disposal to
the place where you purchased it. They will then recycle the appliance.
I wish you much pleasure with this appliance.
Keep these instructions for use in a safe place !
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WDH H6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WDH H6 in the language / languages: English as an attachment in your email.

The manual is 1.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of WDH H6

WDH H6 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info