806986
13
Zoom out
Zoom in
Previous page
1/55
Next page
- 12 -
12. Child lock
1) Press and hold the button + and - at the same time for 3 seconds to turn on the child lock
function. All the buttons will be locked and cannot be operated.
2) Press and hold the button + and - at the same time for 3 seconds again to turn off the child lock
function or unplug the power plug directly.
13. Drainage
When the condensate water is accumulating in the water tank, the water level inside the water tank will
rise above the working level. Thus, a full water alarm will be sent out: the water full indicator and “E2”
fault code illuminate on the digital display.
In case of full water alarm and user would like to drain the water to the working level, or user need to
drain the water in the water tank, please follow the steps below to drain the water in the internal water
tank of the machine.
1) Unscrew the water outlet knob at the back of the appliance, tighten one end of the water inlet /
outlet hose to the drain hole, and connect the other end to a water collecting container or floor drain.
2) Insert the power plug into the power socket and press the power button on the control panel.
3) Press the drainage button, a voice prompt will be heard. Continue to press and hold the drainage
button for more than 3 seconds, the system will automatically start the water pump for drainage.
4) If the water level is above the working level, the drainage will stop when it reaches the working level.
If it is necessary to drain the water in the water tank, repeat step (3) to continue the drainage until it
is drained.
5) After the completion of drainage, the drainage pump will automatically shut down.
6) Remove the water inlet / outlet hose and screw back the water outlet knob.
Note: In order to avoid full water alarm disturbance (for example at night under cold storage, cooling or
strong cooling mode), the provided drainage hose can be used to drain the water continuously. Remove
the plug from the drainage port on the back of the machine. Connect the drainage hose to the port and
drain water into a bucket or floor drain. (When pulling out the plug, condensate may flow out.)
Important:
After switching mode, the compressor may enter the protection state. The unit may keep stationary. You
must wait for 3 minutes before the compressor can start again.
Observe the energy bar to check the status of the remaining stored energy. If the energy bar runs out or
the low temperature indicator / high temperature indicator illuminates, please perform the heat storage
/ cold storage.
Notice:
Once the room temperature reaches to the set temperature, the unit will automatically stop and restart
(according to the room temperature with a temperature difference of 2 degrees).
The control panel will dim in 3 minutes with no operation. Press any button, the lightness will recover.
Wi-Fi CONNECTION GUIDE (The guide for the APP may not be updated regularly due to software version
upgrade or other reasons. This instruction is used as a guide only. Below mobile phone interface uses
English version in iOS as an example.):
1. Search “Tuya Smart” in App Store (for iOS) or Google play (for Android) to download the application.
2. Sign up or log in to your account on the APP. Tap the “+” at top right corner or button Add Device” to add
your device. (Fig.1)
3. Find “Large home appliances and tap the icon “Portable Air Conditioner (BLE+Wi-Fi)”. (Fig.2)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WDH 9000K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WDH 9000K in the language / languages: English, German as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info