Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Assembly instructions:
1. Attachment to the tripod
1.1. Take the round base plate out of the packaging and place the side with the protective felt on the floor.
1.2. Next you need to connect (screw) the three (3) parts of the tripod together. Make sure that the telescope
height lock is at the top.
Note: The three parts of the tripod cannot be screwed together in any order. There are short and long
threads. The short thread belongs/ fits in the base plate !
1.3. Then screw it to the central thread of the base plate.
1.4. After you have securely screwed the stand to the base plate, you can now insert the heating head into the
telescopic holder from above. Make sure that the opening hole for the locking Allen screw is (becomes)
visible through the counter opening of the heating head ! Now tighten (close) the lock for the telescope
height.